Page 86 / 166
Scroll up to view Page 81 - 85
PIN Method: Configure AP as Enrollee
1.
In the WPS configuration page, change the Role to Enrollee. Then press Start.
2.
Jot down the WPS PIN (eg. 25879810).
3.
Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as Registrar.
Enter the PIN number in the PIN Code column then choose the correct AP (eg. wlan-ap) from
the WPS AP List section before pressing the PIN button to run the scan.
82
Page 87 / 166
83
4. The router’s (AP’s) SSID and security setting will now be configured to match the SSID and
security setting of the registrar.
Page 88 / 166
84
5.
Now to make sure that the setup is correctly done, cross check to see if the SSID and the secu-
rity setting of the registrar setting match with the parameters found on both Wireless Configura
-
tion and Wireless Security Configuration page.
Page 90 / 166
86
PBC Method:
1. Press the PBC button of the AP.
2.
Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Config Mode as Enrollee.
Then press the WPS button and choose the correct AP (eg. wlan-ap) from the WPS AP List
section before pressing the PBC button to run the scan.
19216811.live