Page 161 / 166
Scroll up to view Page 156 - 160
157
Remote Access
Remote Access Control:
Select Enable to allow management access from remote side (mostly
from internet).
"Allowed Access IP Address Range" was used to restrict which IP address has the ritght to
remotely access the device using either Telnet , SSH, web GUI or other
terminal management
system.
Valid:
means to enable the IP address Range limitation.
IP Version:
select either IPv4 or IPv6, this is used to indendify the allowed IP.
IP Address Range:
specifys the IP address Range.
Click
Apply
to confirm Remote Access Control setting.
Click
Add
to add a IP Range to allow remote access.
Page 162 / 166
158
Web Access Control
Web access control is to only entitle authorized IPs to access the router’s configuration webpage.
Web Access Control:
Select “Enable” to allow the management of Web control.
Allowed Access IP:
Enter the IP Address allowed.
Time Schedule:
Choose the time scheduled for this fuction to take effect.
Page 163 / 166
Save Configuration to Flash
After changing the router’s configuration settings, you must save all of the configuration parameters
to FLASH to avoid losing them after turning off or resetting your router. Click “Save Config“ and click
“Apply” to write your new configuration to FLASH.
159
Page 164 / 166
Restart
Click “Restart” with option Current Settings to reboot your router (and restore your last saved
configuration).
If you wish to restart the router using the factory default settings (for example, after a firmware
upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to
factory default settings.
160
Page 165 / 166
Chapter 5: Troubleshooting
If your router is not functioning properly, please refer to the suggested solutions provided in this
chapter. If your problems persist or the suggested solutions do not meet your needs, please kindly
contact your service provider or Billion for support.
Problems with the router
Problem
Suggested Action
None of the LEDs lit when the router is
turned on
Check the connection between the router and the
adapter. If the problem persists, most likely it is due
to the malfunction of your hardware. Please contact
your service provider or Billion for technical support.
You have forgotten your login username
or password
Try the default username & password (Please refer
to Chapter 3). If this fails, restore your router to its
default setting by pressing the reset button for more
than 5 seconds.
161
19216811.live