Billion BiPAC-7404VGO Router Manual PDF (Setup & Configuration Guide)

Page 141 / 155 Scroll up to view Page 136 - 140

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

140

Configuration of Time Schedule

Edit a Time Slot

1.

Choose any Time Slot (ID 1 to ID 16) to edit, click

Edit.

Note:

Watch it carefully, the days you have selected will present in capital letter.

Lower case letter shows the

day(s) is not selected, and no rule will apply on this day(s).

2.

A detailed setting of this Time Slot will be shown.

ID:

This is the index of the time slot.

Name:

A user-define description to identify this time portfolio.

Day:

The default is set from Monday through Friday.

You may specify the days for the schedule to be

applied.

Start Time:

The default is set at 8:00 AM.

You may specify the start time of the schedule.

End Time:

The default is set at 18:00 (6:00PM).

You may specify the end time of the schedule.

Select the

Apply

button to apply your changes.

Delete a Time Slot

Click

Clear

to delete the existing Time profile, i.e. erase the Day and back to default setting of Start Time /

End Time.

Click Edit

Page 142 / 155

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

141

Advanced

Configuration options within the

Advanced

section are for users who wish to take advantage of the more

advanced features of the router. Users who do not understand the features should not attempt to

reconfigure their router, unless advised to do so by support staff.

Here are the items within the

Advanced

section:

Static Route, Dynamic DNS

,

Check Email, Device

Management, IGMP

and

VLAN Bridge.

Static Route

Click on

Routing Table

and then choose

Create Route

add a routing table.

Destination:

This is the destination subnet IP address.

Netmask:

Subnet mask of the destination IP addresses based on above destination subnet IP.

Gateway:

This is the gateway IP address to which packets are to be forwarded.

Interface:

Select the interface through which packets are to be forwarded.

Cost:

This is the same meaning as Hop. This should usually be left at 1.

Page 143 / 155

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

142

Dynamic DNS

The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users

whose ISP does not assign them a static IP address to use a domain name. This is especially useful for

hosting servers via your ADSL connection, so that anyone wishing to connect to you may use your

domain name, rather than having to use your dynamic IP address, which changes from time to time. This

dynamic IP address is the WAN IP address of the router, which is assigned to you by your ISP.

You will first need to register and establish an account with the Dynamic DNS provider using their website,

for example http://www.dyndns.org/

There are more than 5 DDNS services supported.

~

Disable:

Check to disable the Dynamic DNS function.

~

Enable:

Check to enable the Dynamic DNS function. The following fields will be activated and

required:

Dynamic DNS Server:

Select the DDNS service you have established an account with.

Domain Name, Username and Password:

Enter your registered domain name and your username and

password for this service.

Period:

Set the time period between updates, for the Router to exchange information with the DDNS

server. In addition to updating periodically as per your settings, the router will perform an update when

your dynamic IP address changes.

Page 144 / 155

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

143

Check Email

This function allows you to have the router check your POP3 mailbox for new Email messages. The Mail

LED on your router will light when it detects new messages waiting for download. You may also view the

status of this function using the Status – Email Checking section of the web interface, which also provides

details on the number of new messages waiting. See the Status section of this manual for more

information.

Check Email:

~

Disable:

Check to disable the router’s Email checking function.

~

Enable:

Check to enable the routers email checking function. The following fields will be

activated and required:

Account Name:

Enter the name (login) of the POP3 account you wish to check. Normally, it is the text in

your email address before the "@" symbol. If you have trouble with it, please contact your ISP.

Password:

Enter the account’s password.

POP3 Mail Server:

Enter your (POP) mail server name. You Internet Service Provider (ISP) or network

administrator will be able to supply you with this.

Period:

Enter the value in minutes between periodic mail checks.

Automatically dial-out for checking emails:

When the function is enabled, your ADSL router will

connect to your ISP automatically to check emails if your Internet connection dropped. Please be careful

when using this feature if your ADSL service is charged by time online.

Page 145 / 155

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

144

Device Management

The Device Management advanced configuration settings allow you to control your router’s security

options and device monitoring features.

Embedded Web Server ( 2 Management IP Accounts)

HTTP Port:

This is the port number the router’s embedded web server (for web-based configuration) will

use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example,

they are running a web server on a PC within their LAN.

Management IP Address:

You may specify an IP address allowed to logon and access the router’s web

server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login from

any IP address.

Expire to auto-logout:

Specify a time frame for the system to auto-logout the user’s configuration

session.

For Example:

User A changes HTTP port number to

100

, specifies their own IP address of

192.168.1.55

,

and sets the logout time to be

100

seconds.

The router will only allow User A access from the IP

address

192.168.1.55

to logon to the Web GUI by typing:

http://

192.168.1.254:100

in their web browser.

Rate

Popular Billion Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share