Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 3: Basic Installation

17

Configuring PC in Windows NT4.0

1.

Go to

Start / Settings / Control Panel

. In the

Control

Panel, double-click

Network

and choose the

Protocols

tab.

2.

Select

TCP/IP Protocol

and click

Properties

. (

See Figure

3.12)

3.

Select the

Obtain an IP address from a DHCP server

radio

button and click

OK

. (

See Figure 3.13)

Figure 3.12: TCP / IP

Figure 3.13: IP Address

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 3: Basic Installation

18

Factory Default Settings

Before configuring your, you need to know the following default settings.

Web Interface (Username and Password)

Username: admin

Password: admin

The default username and password are “

admin

” and “

admin

” respectively.

Device LAN IP settings

IP Address: 192.168.1.254

Subnet Mask: 255.255.255.0

ISP setting in WAN site

PPPoE

DHCP server

DHCP server is enabled.

Start IP Address: 192.168.1.100

IP pool counts: 100

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

LAN Port

WAN Port

IP address

192.168.1.254

Subnet Mask

255.255.255.0

DHCP server function

Enabled

IP

addresses

for

distribution to PCs

100 IP addresses continuing from

192.168.1.100 through 192.168.1.199

The PPPoE function is

enabled

to automatically get the WAN

port configuration from the ISP.

Attention

If you ever forget the username/password to login to the router, you may

press the RESET button up to 6 seconds to restore the factory default

settings.

Caution

: After pressing the RESET button for more than 6 seconds, to be sure you power

cycle the device again.

Attention

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 3: Basic Installation

19

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out

what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP (Fixed IP

Address) and PPPoE.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE(RFC2516)

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,

and Domain Name System (DNS) IP address (it can be automatically

assigned by your ISP when you connect or be set manually).

PPPoA(RFC2364)

VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain

Name System (DNS) IP address (it can be automatically assigned by your ISP

when you connect or be set manually).

MPoA(RFC1483/RF

C2684)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

IPoA(RFC1577)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

Pure Bridge

VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 3: Basic Installation

20

Configuring with your Web Browser

Open your web browser, enter the IP address of your router, which by default is

192.168.1.254

, and click

“

Go

”, a user name and password window prompt will appear. The default username and password are

“admin” and “admin”

respectively

. (See Figure 3.14)

Figure 3.14: User name & Password Prompt Window

Congratulations! You are now successfully logon to the Router!

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

21

Chapter 4: Configuration

At the configuration homepage, the left navigation pane where bookmarks are provided links you directly

to the desired setup page, including:

Status

-

ADSL Status

-

3G Status

-

EWAN Status

-

IBurst Status

-

ARP Table

-

DHCP Table

-

Routing Table

-

NAT Sessions

-

UPnP Portmap

-

PPTP Status

-

IPSec Status

-

L2TP Status

-

Event Log

-

Error Log

-

IDS Log

-

Diagnostic

Quick Start

Configuration

-

LAN

-

WAN

-

System

-

Firewall

-

VPN

-

QoS

-

Virtual Server

-

Wake on LAN

-

Time Schedule

-

Advanced

Language

(provides user interface in English and French languages)