Page 31 / 96 Scroll up to view Page 26 - 30
4.2 Quick Start
For detailed instructions on configuring WAN settings, see the
WAN
section of this manual.
The information you need for the Quick Start wizard to get you online are your login (often in
the form of
username@ispname
), your password, and the encapsulation type.
Your ISP can supply all the details you need. Alternatively, if you have deleted the current
WAN Connection in the
WAN – ISP
section of the interface, you can use the router’s PVC
Scan feature to determine the Encapsulation types offered by your ISP.
29
Page 32 / 96
Connection
Encapsulation:
Select the encapsulation type your ISP uses or choose “Auto Scan”.
Click
Start
to begin scanning for encapsulation types offered by your ISP. If the scan is
successful, you are presented with a list of supported options.
VCI:
Enter the VCI assigned to you. This field may already be configured.
VPI
:
Enter the VPI assigned to you. This field may already be configured
.
NAT:
Select “Enabled” or “Disabled”.
30
Page 33 / 96
Optional Setting
IP Address:
Type your ISP assigned IP address in the IP Address text box.
Subnet Mask:
Enter a subnet mask in dotted decimal notation.
Default Gateway:
You must specify a gateway IP address (supplied by your ISP)
DNS
Obtain DNS automatically:
Select this check box to use DNS.
Primary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are passed
to the DHCP clients along with the IP address and the subnet mask.
Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
PPP
Username:
Enter the username provided by your ISP. You can input up to
128
alphanumeric characters (case sensitive). This is usually in the format of
“username@ispname” instead of simply “username”.
Password:
Enter the password provided by your ISP. You can input up to
128
alphanumeric characters (case sensitive).
31
Page 34 / 96
4.3 Configuration
Click this item to access the following sub-items that configure the ADSL router:
LAN, WAN,
System, Firewall, QoS, Virtual Server
and
Advanced.
These functions are described in the following sections.
32
Page 35 / 96
4.3.1 LAN (Local Area Network)
4.3.1 LAN (Local Area Network)
A Local Area Network (LAN) is a shared communication system to which many computers
are attached and is limited to the immediate area, usually the same building or floor of a
building.
A Local Area Network (LAN) is a shared communication system to which many computers
are attached and is limited to the immediate area, usually the same building or floor of a
building.
There are four items within the LAN section:
Ethernet, Wireless, Wireless Security
and
DHCP Server
.
There are four items within the LAN section:
Ethernet, Wireless, Wireless Security
and
DHCP Server
.
4.3.1.1 Ethernet
The router supports two Ethernet IP addresses in the LAN, and two different LAN subnets
through which you can access the Internet at the same time. Users usually only have one
subnet in their LAN, so there is no need to configure a Secondary IP address. The default IP
address for the router is 192.168.1.254.
RIP:
RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.
The Subnet mask of the Secondary IP Address depends on the setting
of the Primary IP Address.
of the Primary IP Address.
33

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top