Page 256 / 308
Scroll up to view Page 251 - 255
251
6. Connection created. Press
Close
.
7. Go to
Network Connections
shown below to check the detail of the connection. Right click
“L2TP_IPSec” icon, and select “
Properties
” to change the security parameters.
Page 257 / 308
252
8. Chang the type of VPN to “
Layer 2 Tunneling Protocol with IPSec (L2TP/IPSec)
” and Click
Advanced Settings to set the pre-shared (set in IPSec) key for authentication.
Page 258 / 308
253
9. Go to
Network connections
, enter username and password to connect L2TP_IPSec and check
the connection status.
Page 259 / 308
254
Example: Configuring L2TP LAN-to-LAN VPN Connection
The branch office establishes a L2TP VPN tunnel with head office to connect two private networks
over the Internet. The routers are installed in the head office and branch office accordingly.
Note:
Both office LAN networks must be in different subnets with the LAN-LAN application.
Server side: Head Office
Page 260 / 308
255
The above is the commonly setting for L2TP Server, set as you like for authentication and encryption.
The settings in Client side should be in accordance with settings in Server side.
Then account the L2TP Account.
19216811.live