Billion BiPAC 7800VDOX Router Manual PDF (Setup & Configuration Guide)

Page 196 / 308 Scroll up to view Page 191 - 195

191

Port Triggering

Port triggering is a way to automate port forwarding with outbound traffic on predetermined ports

(‘triggering ports’), incoming ports are dynamically forwarded to the initiating host, while the

outbound ports are in use. Port triggering triggers can open an incoming port when a client on the

local network makes an outgoing connection on a predetermined port or a range of ports.

Click

Add

to add a port triggering rule.

Interface:

Select from the drop-down menu the interface you want the port triggering rules apply to.

Application:

Preinstalled applications or Custom Application user can customize the utility yourself.

Custom Application:

It is a kind of service to let users themselves customizes the service they

want. Enter the user-defined service name here.

Trigger Port



Start:

Enter a port number as the triggering port starting number.



End:

Enter a port number as the triggering port ending number.

Any port in the range delimited by the ‘Start’ and ‘End’ would be the trigger port.

Page 197 / 308

192

Open port



Start:

Enter a port number as the open port staring number.



End:

Enter a port number as the open port ending number.

Any port in the range delimited by the ‘Start’ and ‘End’ would be the preset forwarding port or open

port.

Protocol:

select the protocol this service used: TCP/UDP, TCP, UDP.

Set up

An example of how port triggering works, when a client behind a NAT router connecting to Aim Talk,

it is a TCP connection with the default port 4099.

When connecting to Aim Talk, the client typically makes an outgoing connection on port 4099 to the

Aim Talk server, but when the computer is behind the NAT, the NAT silently drops this connection

because it does not know which computer behind the NAT to send the request to connect.

So, in this case, port triggering in the router is working, when an outbound connection is attempted

on port 4099 (or any port in the range set), it should allow inbound connections to that particular

computer.

1.

Select a Server Name from the drop-down menu, then the port will automatically appear, modify

some as you like, or you can just leave it as default. Remember to enter your server IP Address.

2.

Press

Apply

to conform, and the items will be list in the

Virtual Servers Setup

table.

Page 198 / 308

193

Edit/Remove

If you don’t need a specified Server, you can remove it. Check the check box beside the item you

want to remove, and then press

Remove

.

Click

Edit

to re-edit your port-triggering rule.

Page 199 / 308

194

ALG

The ALG Controls enable or disable protocols over application layer.

Page 200 / 308

195

Wake On LAN

Wake on LAN (WOL, sometimes WoL) is an Ethernet computer networking standard that allows a

computer to be turned on or woken up remotely by a network message.

Host Label:

Enter identification for the host.

Select:

Select MAC address of the computer that you want to wake up or turn on remotely.

Wake by Schedule:

Enable to wake up your set device at some specific time. For instance, user

can set to get some device woken up at 8:00 every weekday. Click

Schedule

to enter time schedule

configuring page to set the exact timeline.

Add:

After selecting, click Add then you can submit the Wake-up action.

Edit/Delete:

Click to edit or delete the selected MAC address.

Ready:

“Yes”

indicating the remote computer is ready for your waking up.

“No”

indicating the machine is not ready for your waking up.

Delete:

Delete the selected MAC address.

Rate

Popular Billion Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share