Page 141 / 170
Scroll up to view Page 136 - 140
138
4. The client’s SSID and security setting will now be configured to match the SSID and security
setting of the registrar.
You can check the message in the red ellipse with the security parameters you set, here we all use
the default.
Page 142 / 170
139
Add Enrollee with PBC Method
1. Select radio button “Push-Button” and Click
Or Press the physical button on
router.
Page 143 / 170
140
2. Operate Station to start WPS Adding Enrollee. Launch the wireless client’s WPS Utility (eg.
Ralink Utility). Set the Config Mode as Enrollee. Then press the WPS button and choose the
correct AP (eg. wlan-ap) from the WPS AP List section before pressing the PBC button to run the
scan.
Page 144 / 170
141
3. When the PBC button is pushed, a wireless communication will be established between your
router and the PC. The client’s SSID and security setting will now be configured to match the SSID
and security setting of the router.
Page 145 / 170
142
Configure AP as Enrollee
Add Registrar with PIN Method
1. Set AP to “Unconfigured Mode” and Click “Config AP” button.
19216811.live