Billion BiPAC 7800DXL Router Manual PDF (Setup & Configuration Guide)

Page 156 / 211 Scroll up to view Page 151 - 155

152

Time Restriction

A MAC (Media Access Control) address is the unique network hardware identifier for each PC on

your network’s interface (i.e. its Network Interface Card or Ethernet card). Using your router’s MAC

Address Filter function, you can configure the network to block specific machines from accessing

your LAN during the specified time.

This page adds time of day restriction to a special LAN device connected to the router. To

Restrict

LAN device(s), please click Add button to add the device(s) from accessing internet under some set

time. To find out the MAC address of a window based PC, go to command window, and type

“ipconfig/all”.

Note:

The maximum entries configured: 32.

Click

Add

to add the rules.

Host Label:

User-defined name.

MAC Address:

Enter the MAC address(es) you want to allow or block to access the router and LAN.

The format of MAC address could be: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx. For convenience, user

can select from the list box.

Days of the week:

Select the days of a week the rule takes efforts.

Start Time:

Enter the start time of each day in hh:mm format. Leaving it empty means 00:00.

End Time:

Enter the end time of each day in hh:mm format. Leaving it empty means 23:59.

Click

Apply

to confirm your settings. The following prompt window will appear to remind you of the

attention.

Page 157 / 211

153

An example:

Here you can see that the user “child_use” with a MAC of 18:a9:05:04:12:23 is blocked to access

the router from 00:00 to 23:59 Monday through Friday.

If you needn’t this rule, you can check the box, press Remove, it will be OK.

Page 158 / 211

154

URL Filter

URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or

http://www.example.com) filter rules allow you to prevent users on your network from accessing

particular websites by their URL. There are no pre-defined URL filter rules; you can add filter rules to

meet your requirements.

Note:

1) URL Filter rules apply to both IPv4 and IPv6 sources.

2) But in

Exception IP Address

part, user can click

to set the exception IP address(es) for

IPv4 and IPv6 respectively.

Keywords Filtering:

Allow blocking against specific keywords within a particular URL rather than

having to specify a complete URL (e.g.to block any image called “advertisement.gif”). When enabled,

your specified keywords list will be checked to see if any keywords are present in URLs accessed to

determine if the connection attempt should be blocked. Please note that the URL filter blocks web

browser (HTTP) connection attempts using port 80 only.

Domains Filtering:

This function checks the whole URL address but not the IP address against

your list of domains to block or allow. If it is matched, the URL request will either be sent (Trusted) or

dropped (Forbidden).

Restrict URL Features:

Click Block Java Applet to filter web access with Java Applet components.

Click Block ActiveX to filter web access with ActiveX components. Click Block Cookie to filter web

access with Cookie components. Click Block Proxy to filter web proxy access.

Exception IP Address:

You can input a list of IP addresses as the exception list for URL filtering.

These IPs will not be covered by the URL rules.

Time Schedule:

Select or set exactly when the rule works. When set to “Always On”, the rule will

work all time; and also you can set the precise time when the rule works, like 01:00 of Sun to 19:00

of Friday. Or you can select the already set timeslot in “

Time Schedule

” during which the rule works.

And when set to “Disable”, the rule is disabled. See

Time Schedule

.

Log:

Select Enable for this option if you will like to capture the logs for this URL filter policy. To

check the log, users can turn to

Security Log

.

Page 159 / 211

155

Keywords Filtering

Note:

Maximum number of entries: 32.

Click

to add the keywords.

Enter the Keyword, for example image, and then click

Add.

You can add other keywords like this. The keywords you add will be listed as above. If you want to

reedit the keyword, press the Edit radio button left beside the item, and the word will listed in the

Keyword field, edit, and then press

Edit/Delete

to confirm.

If you want to delete certain keyword,

check Delete checkbox right beside the item, and press

Edit/Delete

. Click

Return

to be back to the

previous page.

Domain Filtering

Note:

Maximum number of entries: 32.

Click

to add Domains.

Domain Filtering:

enter the domain you want this filter to apply.

Type:

select the action this filter deals with the Domain.



Forbidden Domain:

The domain is forbidden access.



Trusted Domain:

The domain is trusted and allowed access.

Enter a domain and select whether this domain is trusted or forbidden with the pull-down menu. Next,

click

Add

. Your new domain will be added to either the Trusted Domain or Forbidden Domain listing,

depending on which you selected previously. For specific process, please refer to

Keywords

Page 160 / 211

156

Filtering.

Exception IP Address

In the section, users can set the exception IP respectively for IPv4 and Ipv6.

Click

to add the IP Addresses.

Enter the except IP address. Click

Add

to save your changes. The IP address will be entered into

the

Exception List

, and excluded from the URL filtering rules in effect. For specific process, please

refer to

Keywords Filtering

.

For example, users can set IPv4 client 192.168.1.103 in your network as a exception address that is

not limited to the rules set in URL filter ( or IPv4 clients (a range) ). And also an IPv6 client

(2000:1211:1002:6ba4:d160:5adb:9009:87ae) or IPv6 clients(a range ) can be the exceptions from

the URL rules.

At the URL Filter page, press

Apply

to confirm your settings.

Rate

Popular Billion Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share