1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. 7204W
    5. /
  5. 17
Page 81 / 117 Scroll up to view Page 76 - 80
of the router, which is assigned to you by your ISP.
You first need to register and establish an account with the Dynamic DNS provider using
their website, for example http://www.dyndns.org/
There are more than 5 DDNS services supported.
Disable:
Check to disable the Dynamic DNS function.
Enable:
Check to enable the Dynamic DNS function. The fields following are activated
and required.
Dynamic DNS Server:
Select the DDNS service you have established an account with.
Host:
Enter one domain name you have registered.
Domain Name, Username and Password:
Enter your registered domain name and
your username and password for this service.
Period:
Set the time period between updates, for the router to exchange information with
the DDNS server. In addition to updating periodically as per your settings, the router
performs an update when your dynamic IP address changes.
Wildcard:
Select this check box to enable the DYNDNS Wildcard.
4.3.7.3 Vlan Control
VLAN (Virtual Local Area Network) is a group of devices on different physical LAN segments
that can communicate with each other as if they were all on the same physical LAN
segment.
79
Downloaded from
www.Manualslib.com
manuals search engine
Page 82 / 117
4.3.7.4 Device Management
The Device Management advanced configuration settings allow you to control your router’s
security options and device monitoring features.
80
Downloaded from
www.Manualslib.com
manuals search engine
Page 83 / 117
Trend Micro
All Trend Micro (TMSS) functions:
Choose “Enable” or “Disable” TMSS functions that
user want.
Embedded Web Server:
HTTP Port:
The port number of the router’s embedded web server (for web-based
configuration uses. The default value is the standard HTTP port, 80. You may specify an
alternative if, for example, you are running a web server on a PC within your LAN.
For Example:
User A changes HTTP port number to
100
, specifies their own IP address of
192.168.1.55
, and sets the logout time to be
100
seconds.
The router only allows User A
access from the IP address
192.168.1.55
to logon to the Web GUI by typing:
http://
192.168.1.254:100
in their web browser. After 100 seconds, the device automatically
logs out User A.
Universal Plug and Play (UPnP):
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along
with control and data transfer between devices. UPnP offers many advantages for users
running NAT routers through UPnP NAT Traversal, and on supported systems makes tasks
such as port forwarding much easier by letting the application control the required settings,
removing the need for the user to control advanced configuration of their device.
Both the user’s Operating System and the relevant application must support UPnP in
addition to the router. Windows XP and Windows Me natively support UPnP (when the
component is installed), and Windows 98 users may install the Internet Connection Sharing
client from Windows XP in order to support UPnP. Windows 2000 does not support UPnP.
~
Disable:
Check to disable the router’s UPnP functionality.
~
Enable:
Check to enable the router’s UPnP functionality.
UPnP Port:
The default setting is 2800. It is highly recommended that you use this port
value. If the value conflicts with other ports already in use you may wish to change the port.
SNMP Access Control
Simple Network Management Protocol—software on a PC within the LAN is required to use
this function.
SNMP V1 and V2:
Read Community:
Specify a name to be identified as the Read Community, and an IP
address.
This community string is checked against the string entered in the configuration
file. Once the string name is matched, you can obtain this IP address and are able to view
81
Downloaded from
www.Manualslib.com
manuals search engine
Page 84 / 117
the data.
Write Community:
Specify a name to be identified as the Write Community, and an IP
address. This community string is checked against the string entered in the configuration file.
Once a string name is matched, users from this IP address are able to view and modify data.
Trap Community:
Specify a name and an IP address. This community string is checked
against the string entered in the configuration file. Once a string name is matched, users
from this IP address are sent SNMP Traps.
SNMP V3:
Specify a name and password for authentication, and define access rights from the identified
IP address. Once authentication has succeeded, users from this IP address are able to view
and modify data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the
SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community
string paradigm for "security" but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism with fine granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
¾
From RFC 1213 (MIB-II):
;
System group
;
Interfaces group
;
Address Translation group
;
IP group
;
ICMP group
;
TCP group
;
UDP group
:
EGP (not applicable)
;
Transmission
;
SNMP group
82
Downloaded from
www.Manualslib.com
manuals search engine
Page 85 / 117
¾
From RFC1650 (EtherLike-MIB):
;
dot3Stats
¾
From RFC 1493 (Bridge MIB):
;
dot1dBase group
;
dot1dTp group
;
dot1dStp group (if configured as spanning tree)
¾
From RFC 1471 (PPP/LCP MIB):
;
pppLink group
:
pppLqr group
¾
From RFC 1472 (PPP/Security MIB):
;
PPP Security Group)
¾
From RFC 1473 (PPP/IP MIB):
;
PPP IP Group
¾
From RFC 1474 (PPP/Bridge MIB):
;
PPP Bridge Group
¾
From RFC1573 (IfMIB):
;
ifMIBObjects Group
¾
From RFC1695 (atmMIB):
;
atmMIBObjects
¾
From RFC 1907 (SNMPv2):
;
only snmpSetSerialNo OID
83
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top