Page 26 / 48 Scroll up to view Page 21 - 25
24
USING YOUR ROUTER
24
Open a web browser on the computer.
In the address bar of the web browser, type
http://192.168.2.1” and press “Enter” on your keyboard.
Click “Login” in the upper right-hand corner of the page. The
Router does not ship with a password, so just click “Submit”.
Click on “Firmware Update” toward the
bottom of the left-hand menu.
Page 27 / 48
25
USING YOUR ROUTER
25
Click the “Browse” button toward the middle of the
screen to search for the file you saved previously.
Note:
The firmware version in the images below is
depicted as an example. Your file name will vary
depending on your model and version.
Select the firmware file by left-clicking on it and then click
the “Open” button in the lower-right corner of the window.
This will take you back into the Router’s interface.
Page 28 / 48
26
USING YOUR ROUTER
26
10°
Click the “Update” button.
11°
A prompt asking, “Are you sure you want to continue
with upgrading?” will appear. Click “OK”.
12°
A second prompt will open telling you the Router will not
respond during the upgrade and warning you not to remove
the power supply from the Router. Click “OK” once more.
Congratulations. The firmware has been updated successfully.
Page 29 / 48
27
USING YOUR ROUTER
Resetting the Router
Reset Button – Red
The “Reset” button is used in rare cases when the Router
may function improperly. Resetting the Router will restore the
Router’s normal operation while maintaining the programmed
settings. You can also restore the factory default settings by
using the “Reset” button. Use the restore option in instances
where you may have forgotten your custom password.
Resetting the Router
Push and release the “Reset” button. The lights on the Router will
momentarily flash. The “Router” light will begin to blink. When
the “Router” light becomes solid again, the reset is complete.
Restoring Your Router to Factory Defaults
Press and hold the “Reset” button for at least 5 seconds,
and then release it. The lights on the Router will momentarily
flash. The “Router” light will begin to blink. When the “Router”
light becomes solid again, the restore is complete.
Page 30 / 48
28
USING YOUR ROUTER
Restoring the Router to Default
Settings Using the Web Interface
Symptoms
You need to restore the factory defaults using the web interface.
This may be because the Router is not performing as expected
or you wish to remove all previously configured settings.
Setup steps
Open a web browser on the computer.
2
.
In the address bar of the web browser, type “http://192.168.2.1”.
Click “Login” in the upper right-hand corner of the page. The
Router does not ship with a password, so just click “Submit”.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top