Belkin F9K1002v4 Router Manual PDF (Setup & Configuration Guide)

Page 16 / 42 Scroll up to view Page 11 - 15

14

TECHNICAL DETAILS

Technical Features

Integrated 802°11n Wireless Access Point

Utilizing MIMO (Multiple Input Multiple Output) smart-

antenna technology, your Router can reach data transfer

speeds of up to 300Mbps across your network.

NAT IP Address Sharing

To save you the cost of adding IP addresses per

computer in your house, your Belkin Router uses Network

Address Translation (NAT) technology, allowing you to

share a single IP address across your network.

SPI Firewall

Your Router is equipped with a firewall that will protect your

network from a wide array of common attacks and viruses.

Web-Based Advanced User Interface

You can easily make changes to your Router’s advanced

settings through your web browser. These changes can

be made from any computer on your network.

Belkin Router Monitor

The Belkin Router Monitor application helps you to monitor

your Router’s status and change network settings.

Integrated 4-Port 10/100 Switch

Your Router has a built-in, 4-port network switch to

allow your wired computers to share: printers, data,

MP3 files, digital photos, and much more.

Page 17 / 42

15

TECHNICAL DETAILS

System Requirements

Router

Broadband Internet connection such as a cable or

DSL modem with RJ45 (Ethernet) connection

At least one computer with an installed network interface adapter

TCP/IP networking protocol installed on each computer

RJ45 Ethernet networking cable

Internet browser

Setup Software

A computer running Windows

®

XP SP3 or higher, Windows

Vista

®

, or Windows 7; or Mac OS

®

X v10.5 or v10.6 only

Minimum 1GHz processor and 512MB RAM

600MB of free hard-drive space for installation

Page 18 / 42

16

USING YOUR ROUTER

Enabling Auto Update on Your Belkin Router

The Router has the capability to automatically check

for a newer version of firmware and alert you when it’s

available. You can choose to download the new version or

ignore it. By default this feature is disabled. If you want to

enable it, select “Enable” and click “Apply Changes”.

Note:

We recommend you use a computer that

has a wired connection to the Router.

Setup steps:

1°

Open a web browser on the computer.

2°

In the address bar of the web browser, type “http://192.168.2.1”.

3°

Click “Login” in the upper right-hand corner of the page. The

Router does not ship with a password, so just click “Submit”.

Page 19 / 42

17

USING YOUR ROUTER

17

5°

Toward the lower-half side of the screen you will

find “Auto Update Firmware Enabling”.

6°

Select “Enable” by clicking the radio button and then

click “Apply Changes” at the bottom of the screen.

4°

Click on “System Settings” in the left-hand

column under the “Utilities” heading.

Page 20 / 42

18

USING YOUR ROUTER

18

Updating Your Router via Your System

Tray (Windows) or Menu Bar (Mac)

Once you have completed the setup process, you will need

to update the new software for your Router. This can be done

easily via your computer’s system tray or menu bar.

Setup steps:

1°

Click on the blue Belkin Router Manager icon (right-click for

Windows) in your system tray (Windows) or menu bar (Mac).

2

.

Select “Check for Updates” or “Update Available” from the menu.

3°

You should now see the Belkin Updater window.

4°

Click on the “Install Update” icon.

Rate

Popular Belkin Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share