Belkin F7D4402v1 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 38 Scroll up to view Page 16 - 20

21

TECHNICAL DETAILS

Technical Features

Integrated ADSL2+ Modem

The integrated ADSL2+ modem allows you to connect to the

Internet via your local Internet Service Provider (ISP) without

installing and maintaining a separate DSL modem°

Integrated 802°11n Wireless Access Point

Utilizing Dual-Band Network technology, your Router

creates two separate networks (one at 2°4GHz band and

the other at 5GHz band), allowing increased bandwidth to

all your connected wireless devices and computers°

NAT IP Address Sharing

To save you the cost of adding IP addresses per

computer in your house, your Belkin Router uses Network

Address Translation (NAT) technology, allowing you to

share a single IP address across your network°

SPI Firewall

Your Router is equipped with a firewall that will protect your

network from a wide array of common attacks and viruses°

UPnP AV MediaServer

Easily share the media contents, such as photographs,

movies, or music, stored in your USB storage device with

other digital media players, such as Microsoft® Xbox®,

Sony® PS3™, etc°, that support the UPnP protocols°

Page 22 / 38

22

TECHNICAL DETAILS

System Requirements

Modem Router

Broadband ADSL Internet connection with

RJ11 (telephone) connection

At least one computer with an installed network interface adapter

TCP/IP networking protocol installed on each computer

RJ11 ADSL telephone cable

Internet browser

Setup Software

A computer running Windows

®

XP SP2 and higher,

Windows Vista

®

32 and 64 bit, or

Windows 7 32 and 64 bit;

or Mac OS

®

X, 10°5 and 10°6

Minimum 1GHz processor and 256MB RAM

600MB of free hard-drive space for installation

Memory Safe and USB Print and Storage Manager

Windows

®

XP SP2 and higher,

Windows Vista

®

32 and 64 bit, or

Windows 7 32 and 64 bit;

or Mac OS

®

X, 10°5 and 10°6

Minimum 1GHz processor and 256MB RAM

50MB of free hard-drive space for installation

Page 23 / 38

23

TECHNICAL DETAILS

Daily DJ and Music Labeler

PC

Windows XP SP2 or higher, Windows Vista, or Windows 7

2GHz processor

1GB of RAM

DirectX

®

9°0-compliant video and sound

Internet Explorer

®

or Firefox

®

Mac

®

Mac OS X v10°5 or later

Intel

®

Core™ Duo 1°83GHz or higher processor

1GB of RAM

Safari

®

or Firefox

200MB of free hard-drive space for installation

Page 24 / 38

24

TROUBLESHOOTING, SUPPORT, AND WARRANTY

Troubleshooting

The Setup CD does not automatically start°

If Belkin Setup does not run when you insert the CD-ROM, your

computer may not be configured to open CDs automatically°

If Belkin Setup does not appear within 15 seconds, browse

to your CD-ROM drive and open the “Belkin Setup” icon°

Alternatively, you may visit

http://router/

and perform the

setup manually° Please see “Manual Setup Using Your

Browser” earlier in this manual for more information°

Belkin Setup cannot find my Router°

If Belkin Setup is not able to communicate with your Router during

the installation process, please check the following items°

1°

Make sure that the wireless hardware on your

computer is turned on, if available°

2°

Try connecting your computer to one of the four “wired”

ports on the Router with an Ethernet cable°

3°

Ensure that the Router is on° The front-panel light should be on°

4°

Unplug the Router’s power supply for 10

seconds, then plug it back in°

5°

There may be firewall software on your computer preventing

an outgoing connection° You may choose to temporarily

disable this software before attempting setup°

If Belkin Setup still cannot find the Router, you might choose

to do a manual setup° Refer to “Manually Configuring

Network Settings” in this manual for details°

Page 25 / 38

25

TROUBLESHOOTING, SUPPORT, AND WARRANTY

Belkin Setup cannot connect my Router to the Internet°

If Belkin Setup is not able to connect the Router to

the Internet, please check the following items:

1°

Use the troubleshooting suggestions within Belkin Setup°

2°

If your ISP requires a user name and password, make sure that

you have typed in your user name and password correctly° Some

user names require that the ISP’s domain may be at the end of the

name° Example: “myname@myisp°com”° The “@myisp°com” part of

the user name may need to be typed as well as your user name°

3°

If you continue to have no Internet connection, refer

to “Manually Configuring Network Settings” in this

manual for an alternative setup method°

Belkin Setup completed installation, but I cannot browse the

Web° The light on the front of my Router is blinking amber°

1°

Make sure the Router is connected to your ADSL line with an

RJ11 (telephone) cable via the Router’s one gray ADSL port°

2°

Check that the modem (ADSL) connection is

connected to your broadband (ADSL) socket on the

wall (via an ADSL filter if one is required)°

3°

Unplug your Router’s power supply, wait 10 seconds,

and plug it back in° This will cause the Router to try to

reestablish communication with the ADSL line°

Rate

Popular Belkin Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share