Page 21 / 38 Scroll up to view Page 16 - 20
19
TECHNICAL DETAILS
Technical Features
Integrated ADSL2+ Modem
The integrated ADSL2+ modem allows you to connect to the
Internet via your local Internet Service Provider (ISP) without
installing and maintaining a separate DSL modem°
Integrated 802°11n Wireless Access Point
Utilizing Dual-Band Network technology, your Router
creates two separate networks (one at 2°4GHz band and
the other at 5GHz band), allowing increased bandwidth to
all your connected wireless devices and computers°
NAT IP Address Sharing
To save you the cost of adding IP addresses per
computer in your house, your Belkin Router uses Network
Address Translation (NAT) technology, allowing you to
share a single IP address across your network°
SPI Firewall
Your Router is equipped with a firewall that will protect your
network from a wide array of common attacks and viruses°
Universal Plug-and-Play (UPnP) Compatibility
The UPnP (Universal Plug-and-Play) feature in your Router
offers seamless operation of voice and video messaging,
games, and other applications that are UPnP-compliant°
Web-Based Advanced User Interface
You can easily make changes to your Router’s advanced
settings through your web browser° These changes can
be made from any computer on your network°
Belkin Router Monitor
The Belkin Router Monitor application helps you to monitor
your Router’s status and change network settings°
Integrated 4-Port Gigabit Switch
Your Router has a built-in, 4-port network switch to allow your
wired computers to share: printers, data, MP3 files, digital photos,
and much more at speeds of up to one gigabit per second°
Dual USB Ports
Two USB ports let you plug in printers, hard drives, and
other USB devices to share across your network°
Page 22 / 38
20
TECHNICAL DETAILS
System Requirements
Modem Router
Broadband ADSL Internet connection with
RJ11 (telephone) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ11 ADSL telephone cable
Internet browser
Setup Software
A computer running Windows
®
XP SP2 or higher,
Windows Vista
®
, or Windows 7; or Mac OS
®
X v10°x
Minimum 1GHz processor and 256MB RAM
600MB of free hard-drive space for installation
Memory Safe and USB Print and Storage Manager
Windows XP SP2 or higher or Windows
Vista; or Mac OS X v10°4 or later
Minimum 1GHz processor and 256MB RAM
50MB of free hard-drive space for installation
Page 23 / 38
21
TECHNICAL DETAILS
Daily DJ, Music Labeler, and Vuze
PC
Windows XP SP2 or higher, Windows Vista, or Windows 7
2GHz processor
1GB of RAM
DirectX
®
9°0-compliant video and sound
Internet Explorer
®
or Firefox
®
Mac
®
Mac OS X v10°4°8 or later
Intel
®
Core™ Duo 1°83GHz or higher processor
1GB of RAM
Safari
®
or Firefox
200MB of free hard-drive space for installation
Page 24 / 38
22
TROUBLESHOOTING, SUPPORT, AND WARRANTY
Troubleshooting
The Setup CD does not automatically start°
If Belkin Setup does not run when you insert the CD-ROM, your
computer may not be configured to open CDs automatically°
If Belkin Setup does not appear within 15 seconds, browse
to your CD-ROM drive and open the “Belkin Setup” icon°
Alternatively, you may visit
http://router/
and perform the
setup manually° Please see “Manual Setup Using Your
Browser” earlier in this manual for more information°
Belkin Setup cannot find my Router°
If Belkin Setup is not able to communicate with your Router during
the installation process, please check the following items°
Make sure that the wireless hardware on your
computer is turned on, if available°
Try connecting your computer to one of the four “wired”
ports on the Router with an Ethernet cable°
Ensure that the Router is on° The front-panel light should be on°
Unplug the Router’s power supply for 10
seconds, then plug it back in°
There may be firewall software on your computer preventing
an outgoing connection° You may choose to temporarily
disable this software before attempting setup°
If Belkin Setup still cannot find the Router, you might choose
to do a manual setup° Refer to “Manually Configuring
Network Settings” in this manual for details°
Page 25 / 38
23
TROUBLESHOOTING, SUPPORT, AND WARRANTY
Belkin Setup cannot connect my Router to the Internet°
If Belkin Setup is not able to connect the Router to
the Internet, please check the following items:
Use the troubleshooting suggestions within Belkin Setup°
If your ISP requires a user name and password, make sure that
you have typed in your user name and password correctly° Some
user names require that the ISP’s domain may be at the end of the
name° Example: “myname@myisp°com”° The “@myisp°com” part of
the user name may need to be typed as well as your user name°
If you continue to have no Internet connection, refer
to “Manually Configuring Network Settings” in this
manual for an alternative setup method°
Belkin Setup completed installation, but I cannot browse the
Web° The light on the front of my Router is blinking amber°
Make sure the Router is connected to your ADSL line with an
RJ11 (telephone) cable via the Router’s one gray ADSL port°
Check that the modem (ADSL) connection is
connected to your broadband (ADSL) socket on the
wall (via an ADSL filter if one is required)°
Unplug your Router’s power supply, wait 10 seconds,
and plug it back in° This will cause the Router to try to
reestablish communication with the ADSL line°

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top