Page 16 / 36 Scroll up to view Page 11 - 15
14
GETTING STARTED
Bundled Software
USB Print and Storage Manager
The USB Print and Storage Manager helps to manage and
monitor the use of your USB printers, scanners, hard drives,
and other devices that are connected to your Router’s USB
port and shared across your network° USB Print and Storage
Manager is found in the Belkin Router Manager icon displayed
in your system tray (Windows) or menu bar (Mac)°
When you have one or more USB devices attached to your
Router, the main actions for those devices are available
directly from the Belkin Router Monitor menu°
Memory Safe
Memory Safe allows you to set up a routine backup of your
files to a hard drive or flash drive attached to your Router°
Memory Safe is found in the Belkin Router Manager icon
displayed in your system tray (Windows) or menu bar (Mac)°
Page 17 / 36
15
GETTING STARTED
Additional Capabilities
Guest Access
You can allow guests to use your Internet connection without
joining your personal network° The network name and
password for the guest network is located on the network
information card found under the foot of your Router°
A person using your guest network will be able to join
without a password, but will be shown a login page when
they attempt to surf the Web° They will need to enter
the guest password into this page to continue°
Page 18 / 36
16
GETTING TO KNOW YOUR ROUTER
A) Router Status Light
Your Router’s status is shown by the light on the front°
Off:
The Router is not plugged into a power source°
Blinking Green:
The Router is starting up°
Solid Green:
The Router is connected to the Internet°
Blinking Amber:
Either the RJ11 cable is not
plugged in, or there is no signal°
B) Wi-Fi Protected Setup (WPS) Light and Button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers° To use
the WPS feature on your Router, see “Getting Started > Adding
Computers to Your Network > Using the WPS Button”°
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection°
Off:
Idle
Blinking Green:
The Router is listening for a
WPS-enabled computer or other device°
Solid Green:
The Router has made a secure
connection with the computer or other device°
Amber:
A connection was not created°
Front Panel
(a)
(b)
Page 19 / 36
17
GETTING TO KNOW YOUR ROUTER
A) ADSL Connector
Connect your Router to
your ADSL connection°
B) Wired (LAN) Connectors
Connect computers and other
wired network devices to these
ports using Ethernet cables°
C) USB Port
USB printers, disks, and other
USB devices plugged into this
port will be shared on your
network° Each USB port has a
light that indicates its status°
Off:
No USB device is
connected or the attached
USB device is not in use°
Blinking:
Please wait to
unplug the device until
the light turns off°
On:
The USB device is
connected and being
shared on your network°
D) Reset Button
This button is used to restart
your Router in rare cases when it
functions incorrectly° Resetting
the Router will preserve your
settings° This button may also
be used to restore the factory
default settings° Please see
the Troubleshooting section
for more information°
E) Power Connector
Connect the included power
supply to this jack°
Back Panel
(a)
(b)
(c)
(d)
(e)
Page 20 / 36
18
TECHNICAL DETAILS
Technical Features
Integrated ADSL2+ Modem
The integrated ADSL2+ modem allows you to connect to the
Internet via your local Internet Service Provider (ISP) without
installing and maintaining a separate DSL modem°
Integrated 802°11n Wireless Access Point
Utilizing MIMO (Multiple Input Multiple Output) smart-
antenna technology, your Router can reach data transfer
speeds of up to 300Mbps across your network°
NAT IP Address Sharing
To save you the cost of adding IP addresses per
computer in your house, your Belkin Router uses Network
Address Translation (NAT) technology, allowing you to
share a single IP address across your network°
SPI Firewall
Your Router is equipped with a firewall that will protect your
network from a wide array of common attacks and viruses°
Universal Plug-and-Play (UPnP) Compatibility
The UPnP (Universal Plug-and-Play) feature in your Router
offers seamless operation of voice and video messaging,
games, and other applications that are UPnP-compliant°
Web-Based Advanced User Interface
You can easily make changes to your Router’s advanced
settings through your web browser° These changes can
be made from any computer on your network°
Belkin Router Monitor
The Belkin Router Monitor application helps you to monitor
your Router’s status and change network settings°
Integrated 4-Port 10/100 Switch
Your Router has a built-in, 4-port network switch to
allow your wired computers to share: printers, data,
MP3 files, digital photos, and much more°
USB Port
The USB port lets you plug in printers, hard drives, and
other USB devices to share across your network°

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top