1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F7D3301v1
    5. /
  5. 3
Page 11 / 37 Scroll up to view Page 6 - 10
9
GETTING STARTED
Adding Computers to Your Network
Wireless devices such as computers, network printers, and gaming
systems can connect to your Router with a few simple steps°
Using the CD
1°
Put the Setup CD into your computer° If the CD
doesn’t open automatically, browse to your CD
drive and open the Belkin Setup CD icon°
2°
Click the Setup icon on the CD menu°
3°
After a brief installation, the setup software will ask you for the
network name and password from the network information card
that came with your Router° This card is most likely now located
underneath the foot of your Router in the provided card slot°
4°
A progress screen will appear while additional software is
installed° This may take a few minutes to complete° Once
finished, a “Success” message will appear indicating that you
are connected to the Internet via your new Belkin Router°
Note:
The setup software runs only on
Windows and Mac OS X systems°
Page 12 / 37
10
GETTING STARTED
Manually
If you choose not to use the included Setup CD for
adding additional computers or wireless devices, you
can manually add these items to your network°
1°
Locate the wireless-network-connections option
on your computer or wireless device°
2°
Select your Belkin Router from the list of available networks° You
can identify your Belkin Router by locating the network name
(SSID) from the card located underneath the foot of your Router°
3°
Enter your network password (located on
your network information card)°
Your wireless device will take a few moments to connect to your
network° If the connection is not made the first time, try this
process again° If you still have difficulty connecting to your network
after trying this process a few times, see the “Troubleshooting”
section in this manual for help with connecting to your network°
Note:
In some cases you may be prompted to select the
security type° It is printed on the card for your convenience°
Using the WPS Button
1°
Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi-Fi device that you would like to connect
wirelessly to your Router° Often there will be a button for this
purpose in software that came with the device, or a physical
“WPS,” “PBC,” or “Security” button on the device itself°
2°
Within two minutes, press the WPS button on your Router°
The WPS light (small light above WPS button) will blink green while
it listens for your Wi-Fi device° Once a connection is established, the
light will turn green and then go out° If a connection is not established,
the light will blink amber° You may repeat the process to try again°
You can repeat this process for each WPS-enabled
device you’d like to add to your network°
Page 13 / 37
11
GETTING STARTED
Adding USB Devices
USB
Page 14 / 37
12
GETTING STARTED
Adding a Drive
You can share a USB hard drive or flash drive to your network via
your Router’s USB port° Once connected, you can share files and
music with other computers and devices within your network°
Plug your USB hard drive into the USB port on the back
of your Router° When the light above the USB port is lit,
your drive is available to computers on your network°
You can manually check the status of your shared drive by visiting
the USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu
bar (Mac)° If you have difficulty sharing a drive on your network,
please see the “Troubleshooting” section of this manual°
Adding a Printer
You can add a printer to your network via your Router’s
USB port° Once connected, you can print from various
computers and wireless devices within your network°
Plug your printer’s USB cable into the USB port located on
the back of your Router° When the light above the USB port is
lit, your printer is available to computers on your network°
You can manually check the status of your printer by visiting the
USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu
bar (Mac)° If you have difficulty sharing a printer on your network,
please see the “Troubleshooting” section of this manual°
Note:
Each computer that will use the printer must have
both the Belkin software and the printer’s driver installed°
If the print driver is not installed, you will be asked to install
it by the Belkin USB Print and Storage Manager°
Page 15 / 37
13
GETTING STARTED
Adding Other USB Devices
Other USB devices may also be shared via your Router°
Plug your device into the USB port located on the back of
your Router° When the light above the USB port is lit, your
device is available to computers on your network°
Computers running the Belkin USB Print and Storage Manager will
be able to make use of the shared device by visiting the USB Print
and Storage Manager, found under the Belkin Router Manager
icon displayed in your system tray (Windows) or menu bar (Mac)°

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top