Page 76 / 98
Scroll up to view Page 71 - 75
74
Enhanced Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Windows 98SE or Me
1�
Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu�
2�
Select “TCP/IP -> settings” for your installed network adapter� You
will see the following window�
3�
If “Specify an IP address” is selected, your Router will need
to be set up for a static IP connection type� Write the address
information in the table below� You will need to enter this
information into the Router�
6�
Click the “DNS Configuration” tab
(1)
� Write the DNS address(es) in
the chart�
7�
If not already selected, select “Obtain IP address automatically” in
the “IP Address” tab� Click “OK”�
Restart the computer� When the computer restarts, your network
adapter(s) are now configured for use with the Router�
(3)
(1)
(2)
4�
Write in the IP address and subnet mask from the “IP Address”
tab
(3)
�
5�
Click the “Gateway” tab
(2)
� Write the gateway address down in
the chart�
Page 77 / 98
75
Enhanced Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
9
10
RECOMMENDED WEB BROWSER SETTINGS
8
In most cases, you will not need to make any changes to your web browser’s settings� If you are having trouble accessing the Internet or the
Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section�
Internet Explorer 4�0 or Higher
1�
Start your web browser� Select “Tools” then “Internet Options”�
2�
In the “Internet Options” screen, there are three selections: “Never
dial a connection”, “Dial whenever a network connection is not
present”, and “Always dial my default connection”� If you can make
a selection, select “Never dial a connection”� If you cannot make a
selection, go to the next step�
Page 78 / 98
76
Enhanced Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
9
10
8
RECOMMENDED WEB BROWSER SETTINGS
3�
Under the “Internet Options” screen, click on “Connections” and
select “LAN Settings…”�
4�
Make sure there are no check marks next to any of the displayed
options: “Automatically detect settings”, “Use automatic
configuration script”, and “Use a proxy server”� Click “OK”� Then
click “OK” again in the “Internet Options” page�
Netscape
®
Navigator
®
4�0 or Higher
1�
Start Netscape� Click on “Edit” then “Preferences”�
2�
In the “Preferences” window, click on “Advanced” then select
“Proxies”� In the “Proxies” window, select “Direct connection to
the Internet”�
Page 79 / 98
77
Enhanced Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
TROUBLESHOOTING
9
Problem:
Setup Assistant CD does not automatically start�
Solution:
If the CD-ROM does not start the Setup Assistant automatically, it could be that the computer is running other applications that are interfering with
the CD drive�
2�
Next, double-click on the CD-ROM drive that the Setup Assistant
Software CD has been placed in to start the installation�
1�
If the Setup Assistant
screen does not appear
within 15–20 seconds, open
up your CD-ROM drive
by double-clicking on the
“My Computer” icon that is
located on your desktop�
Page 80 / 98
78
Enhanced Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
9
TROUBLESHOOTING
3�
The Setup Assistant should start within a few seconds� If,
instead, a window appears showing the files on the CD,
double-click on the icon labeled “SetupAssistant”�
4�
If the Setup Assistant still does not start, reference
the section titled “Manually Configuring Network
Settings” (page 70) of this User Manual for an alternative
setup method�
19216811.live