Page 26 / 98 Scroll up to view Page 21 - 25
24
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
6� Language
Shows the active language for the Advanced User Interface� Select a
desirable language by clicking one of the available languages�
7� Version Info
Shows the firmware version, boot-code version, hardware version, and
serial number of the Router�
8� LAN Settings
Shows you the settings of the Local Area Network (LAN) side of the
Router� Changes can be made to the settings by clicking on any one
of the links (IP Address, Subnet Mask, DHCP Server) or by clicking the
“LAN” quick-navigation link on the left side of the screen�
9� Internet Settings
Shows the settings of the Internet/WAN side of the Router that
connects to the Internet� Changes to any of these settings can be made
by clicking on the links or by clicking on the “Internet/WAN” quick-
navigation link on the left side of the screen�
10� Features
Shows the status of the Router’s, firewall, and wireless features�
Changes can be made to the settings by clicking on any one of the links
or by clicking the quick-navigation links on the left side of the screen�
11� Page Name
The page you are on can be identified by this name� This User Manual
will sometimes refer to pages by name� For instance “LAN > LAN
Settings” refers to the “LAN Settings” page�
Page 27 / 98
25
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
Setting your Connection Type
From the “Connection Type” page, you can select the type of connection
you use� Select the type of connection you use by clicking the button
(1)
next to your connection type and then clicking “Next”
(2)
(1)
(2)
Step 4: Configuring your Router for Connection to your Internet Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your Router to connect
to your Internet Service Provider (ISP)� The Router is capable of
connecting to virtually any ISP’s system provided you have correctly
configured the Router’s settings for your ISP’s connection type� Your ISP
connection settings are provided to you by your ISP� To configure the
Router with the settings that your ISP gave you, click “Connection Type”
(A)
on the left side of the screen� Select the connection type you use� If
your ISP gave you DNS settings, clicking “DNS”
(B)
allows you to enter
DNS address entries for ISPs that require specific settings� Clicking
“MAC Address”
(C)
will let you clone your computer’s MAC address or
type in a specific WAN MAC address, if required by your ISP� When you
have finished making settings, the “Internet Status” indicator will read
“connected” if your Router is set up properly�
(B)
(A)
(C)
Page 28 / 98
26
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
1� Host Name (1)
This space is provided to enter a host name that needs to be visible
to your ISP� Enter your host name here and click “Apply Changes”
(3)
If your ISP did not assign you a host name, or you are not sure, leave
this blank�
Setting your Internet Service Provider (ISP) Connection Type to Dynamic IP
A dynamic connection type is the most common connection type found with cable modems� Setting the connection type to “dynamic” in many cases
is enough to complete the connection to your ISP� Some dynamic connection types may require a host name� You can enter your host name in the
space provided if you were assigned one� Your host name is assigned by your ISP� Some dynamic connections may require that you clone the MAC
address of the PC that was originally connected to the modem�
(1)
(3)
(2)
2� Change WAN MAC Address (2)
If your ISP requires a specific MAC address to connect to the service,
you can enter a specific MAC address or clone the current computer’s
MAC address through this link�
Page 29 / 98
27
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
1�
IP Address (1)
Provided by your ISP� Enter your IP address here�
2�
Subnet Mask (2)
Provided by your ISP� Enter your subnet mask here�
3�
ISP Gateway Address (3)
Provided by your ISP� Enter the ISP gateway address here�
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static IP address connection type is less common than other connection types� If your ISP uses static IP addressing, you will need your IP address,
subnet mask, and ISP gateway address� This information is available from your ISP or on the paperwork that your ISP left with you� Type in your
information, then click “Apply Changes”
(4)
� After you apply the changes, the Internet Status indicator will read “connected” if your Router is set
up properly�
(1)
(2)
(4)
(3)
Page 30 / 98
28
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
Setting your ISP Connection Type to PPPoE
Most DSL providers use PPPoE as the connection type� If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into
the service� If you have an Internet connection in your home or small office that doesn’t require a modem, you may also use PPPoE�
Your connection type is PPPoE if:
-
Your ISP gave you a user name and password, which is required to
connect to the Internet�
-
Your ISP gave you software such as WinPOET or Enternet300 that
you use to connect to the Internet�
-
You have to double-click on a desktop icon other than your
browser to get on the Internet�
(1)
(2)
(4)
(3)
(5)
(6)

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top