Page 16 / 98 Scroll up to view Page 11 - 15
14
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
Progress Screen
Setup Assistant will show you a progress screen each time a step in the
setup has been completed�
Confirmation Screen
Verify that you have completed all QIG steps by checking the box to the
right of the arrow� Click “Next” to continue�
Page 17 / 98
15
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
1�2 Verifying Hardware Connections
The Setup Assistant will now verify your hardware connection�
1�1 Checking Settings
The Setup Assistant will now examine your computer’s network settings
and gather information needed to complete the Router’s connection to
the Internet�
Page 18 / 98
16
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
1�4 Requesting Internet Account Info (if needed)
If your Internet account requires a login and password, you will be
prompted with a screen similar to the illustration below� Select your
country or ISP from the drop-down boxes�
1�3 Naming your Wireless Network
The Setup Assistant will display the default wireless network name or
Service Set Identifier (SSID)� This is the name of your wireless network
to which your computers or devices with wireless network adapters
will connect� You can either use the default or change it to something
unique� Write down this name for future reference� Click “Next”
to continue�
Page 19 / 98
17
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
1�5 Configuring the Router
The Setup Assistant will now configure your Router by sending data to
the Router and restarting it� Wait for the on-screen instructions�
Note:
Do not disconnect any cable or power off the Router while the
Router is rebooting� Doing so will render your Router inoperable�
1�6 Checking Internet Connection
We are almost done� The Setup Assistant will now check your
connection to the Internet�
Page 20 / 98
18
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
Congratulations
You have finished installing your new Belkin Router� You will see
the Congratulations screen when your Router can connect to the
Internet� You can begin surfing by opening your browser and going to
any website�
You can use the Setup Assistant to set up your other wired and wireless
computers to connect to the Internet by clicking “Next”� If you decide to
add computers to your Router later, select “Exit the Assistant” and then
click “Next”�
Troubleshooting
If the Setup Assistant is not able to connect to the Internet, you will see
the following screen� Follow the on-screen instructions to go through the
troubleshooting steps�

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top