1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D9230-4v5
    5. /
  5. 8
Page 36 / 120 Scroll up to view Page 31 - 35
32
Alternate Setup Method
Understanding the Web-Based Advanced User Interface
The home page is the first page you will see when you access the Advanced
User Interface (UI). The home page shows you a quick view of the Router’s
status and settings. All advanced setup pages can be reached from this page.
1.
Quick-Navigation Links
You can go directly to any of the Router’s advanced UI pages by clicking
directly on these links. The links are divided into logical categories
and grouped by tabs to make finding a particular setting easier to
find. Clicking on the purple header of each tab will show you a short
description of the tab’s function.
2.
Home Button
The home button is available in every page of the UI. Pressing this button
will take you back to the home page.
3.
Internet Status Indicator
This indicator is visible in all pages of the Router, indicating the
connection status of the Router. When the indicator says “connection
OK” in GREEN, the Router is connected to the Internet. When the
Router is not connected to the Internet, the indicator will read “no
connection” in RED. The indicator is automatically updated when
you make changes to the settings of the Router.
(2)
(3)
(4)
(5)
(6)
(10)
(1)
Page 37 / 120
33
Alternate Setup Method
section
1
9
2
3
4
5
6
7
8
10
4.
Login/Logout Button
This button enables you to log in and out of the Router with the press of
one button. When you are logged into the Router, this button will change
to read “Logout”. Logging into the Router will take you to a separate
login page where you will need to enter a password. When you are
logged into the Router, you can make changes to the settings. When you
are finished making changes, you can log out of the Router by clicking
the “Logout” button. For more information about logging into the Router,
see the section called “Logging into the Router”.
5.
Help Button
The “Help” button gives you access to the Router’s help pages. Help
is also available on many pages by clicking “more info” next to certain
sections of each page.
6.
LAN Settings
Shows you the settings of the Local Area Network (LAN) side of the
Router. Changes can be made to the settings by clicking on any one
of the links (IP Address, Subnet Mask, DHCP Server) or by clicking the
“LAN” quick-navigation link on the left side of the screen.
7.
Features
Shows the status of the Router’s NAT, firewall, and wireless features.
Changes can be made to the settings by clicking on any one of the links
or by clicking the quick-navigation links on the left side of the screen.
8.
Internet Settings
Shows the settings of the Internet/WAN side of the Router that connects
to the Internet. Changes to any of these settings can be made by clicking
on the links or by clicking on the “Internet/WAN” quick-navigation link on
the left side of the screen.
9.
Version Info
Shows the firmware version, boot-code version, hardware version, and
serial number of the Router.
10. Page Name
The page you are on can be identified by this name. This User Manual
will sometimes refer to pages by name. For instance
“LAN > LAN
Settings” refers to the “LAN Settings” page.
Page 38 / 120
34
Alternate Setup Method
Step 4:
Configuring your Router for Connection to your Internet
Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your Router to connect to
your Internet Service Provider (ISP). The Router is capable of connecting to
virtually any ISP’s system provided you have correctly configured the Router’s
settings for your ISP’s connection type. Your ISP connection settings are
provided to you by your ISP. To configure the Router with the settings that
your ISP gave you, click “Connection Type”
(A)
on the left side of the screen.
Select the connection type you use. If your ISP gave you DNS settings,
clicking “DNS”
(B)
allows you to enter DNS address entries for ISPs that
require specific settings. Clicking “MAC Address”
(C)
will let you clone your
computer’s MAC address or type in a specific WAN MAC address, if required
by your ISP. When you have finished making settings, the “Internet Status”
indicator will read “connection OK” if your Router is set up properly.
(A)
(B)
(C)
Page 39 / 120
35
Alternate Setup Method
section
1
9
2
3
4
5
6
7
8
10
Setting your Connection Type
From the “Connection Type” page, you can select the type of connection you
use. Select the type of connection you use by clicking the button
(1)
next to
your connection type and then clicking “Next”
(2)
.
(1)
Page 40 / 120
36
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection
Type to Dynamic IP
A dynamic connection type is the most common connection type found with
cable modems. Setting the connection type to “dynamic” in many cases is
enough to complete the connection to your ISP. Some dynamic connection types
may require a host name. You can enter your host name in the space provided if
you were assigned one. Your host name is assigned by your ISP. Some dynamic
connections may require that you clone the MAC address of the PC that was
originally connected to the modem.
1.
Host Name
This space is provided to enter a host name that needs to be visible to your
ISP. Enter your host name here and click “Apply Changes”. If your ISP did
not assign you a host name, or you are not sure, leave this blank.
2.
Change WAN MAC Address
If your ISP requires a specific MAC address to connect to the service, you
can enter a specific MAC address or clone the current computer’s MAC
address through this link.

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top