Page 21 / 100
Scroll up to view Page 16 - 20
19
N Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR MODEM ROUTER
2°4 Requesting Internet Account Info (if needed)
Select your ISP from the drop-down boxes°
2°3 Naming your Wireless Network
The Setup Assistant will display the default wireless network name or
Service Set Identifier (SSID)° This is the name of your wireless network
to which your computers or devices with wireless network adapters
will connect° You can either use the default or change it to something
unique° Write down this name for future reference°
If the Router is capable of “High Speed Mode”, this option will be
checked° You can turn off this option later using the Bandwidth Switch
described in this User Manual (see page 44)° Click “Next” to continue°
Page 22 / 100
20
N Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR MODEM ROUTER
2°5 Configuring the Router
The Setup Assistant will now configure your Router by sending data to
the Router and restarting it° Wait for the on-screen instructions°
Note:
Do not disconnect any cable or power off the Router while the
Router is rebooting° Doing so will render your Router inoperable°
If your Internet account requires a login and password, you will be
prompted with a screen similar to the illustration below° Click “Next”
to continue°
Page 23 / 100
21
N Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR MODEM ROUTER
Congratulations
You have finished installing your new Belkin Router° You will see
the Congratulations screen when your Router can connect to the
Internet° You can begin surfing by opening your browser and going
to any website°
You can use the Setup Assistant to set up your other wired and
wireless computers to connect to the Internet by clicking “Next”° If
you decide to add computers to your Router later, select “Finish—
return to Main Menu” and then click “Next”°
2°6 Checking Internet Connection
We are almost done° The Setup Assistant will now check your
connection to the Internet°
Page 24 / 100
22
N Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR MODEM ROUTER
2°7 Optional: Assistance Connecting Other Computers
This optional step will help you to connect additional wired and wireless
computers to your network° Follow the on-screen instructions°
Troubleshooting
If the Setup Assistant is not able to connect to the Internet, you will see the following screen° Follow the on-screen instructions to go through the
troubleshooting steps°
Page 25 / 100
23
N Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR MODEM ROUTER
Step 3: Set Up Wireless Security –
Run the Security Assistant Software
Now that your network is set up and working, it is recommended that
you turn on wireless security to prevent unauthorized access to your
network from neighboring wireless-enabled computers° The Security
Assistant will guide you through the process° Click “Security Assistant”
and follow the on-screen instructions°
Once you have verified that your other wired and wireless computers are
properly connected, your network is set up and working° You can now
surf the Internet° Click “Next” to return to the main menu°
IMPORTANT:
Run the Setup Assistant from the computer that is
directly connected to the Router from Steps 1°1B and 1°2B°
19216811.live