Page 66 / 101
Scroll up to view Page 61 - 65
64
Using the Web-Based Advanced User Interface
Restarting the Router
Sometimes it may be necessary to restart or reboot the Router if it
begins working improperly. Restarting or rebooting the Router will
NOT
delete any of your configuration settings.
Restarting the Router to Restore Normal Operation
1.
Click the “Restart
Router” button.
2.
The following message
will appear. Click “OK”.
4.
A 60-second countdown will appear on the screen. When the
countdown reaches zero, the Router will be restarted. The Router
home page should appear automatically. If not, type in the
Router’s address (default =
192.168.2.1) into the navigation
bar of your browser.
3.
The following message
will appear. Restarting
the Router can take
up to 60 seconds. It is
important not to turn off
the power to the Router
during the restart.
Page 67 / 101
65
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
Restoring Factory Default Settings
Using this option will restore all of the settings in the Router to the
factory (default) settings. It is recommended that you back up your
settings before you restore all of the defaults.
1.
Click the “Restore
Defaults” button.
4.
A 60-second countdown will appear on the screen. When the
countdown reaches zero, the Router’s defaults will be restored.
The Router home page should appear automatically. If it does
not, type in the Router’s address (default =
192.168.2.1) into the
navigation bar of your browser.
2.
The following message
will appear. Click “OK”.
3.
The following message
will appear. Restoring
the defaults includes
restarting the Router.
It can take up to 60
seconds. It is important
not to turn the power
to the Router off during
the restart.
Page 68 / 101
66
Using the Web-Based Advanced User Interface
Saving a Current Configuration
You can save your current configuration by using this feature. Saving
your configuration will allow you to restore it later if your settings are
lost or changed. It is recommended that you back up your current
configuration before performing a firmware update.
1.
Click “Save”. A window
called “File Download”
will open. Click “Save”.
2.
A window will open that
allows you to select
the location where
you want to save the
configuration file. Select
a location. You can
name the file anything
you want, or use the
default name “Config”.
Be sure to name the
file so you can locate
it yourself later. When
you have selected the
location and name of
the file, click “Save”.
Page 69 / 101
67
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
3.
When the save is
complete, you will
see this window.
Click “Close”.
4.
The configuration is
now saved.
Restoring a Previous Configuration
This option will allow you to restore a previously saved configuration.
1.
Click “Browse”. A
window will open that
allows you to select
the location of the
configuration file. All
configuration files end
with a “.cfg”. Locate the
configuration file you
want to restore and
double-click on it.
Page 70 / 101
68
Using the Web-Based Advanced User Interface
2.
You will be asked if you
want to continue.
Click “OK”.
3.
A reminder window
will appear. It will
take up to 60 seconds
for the configuration
restoration to complete.
Click “OK”.
4.
A 60-second countdown will appear on the screen. When the
countdown reaches zero, the Router’s configuration will be
restored. The Router home page should appear automatically. If
not, type in the Router’s address (default =
192.168.2.1) into the
navigation bar of your browser.
19216811.live