Page 11 / 104 Scroll up to view Page 6 - 10
Product Overview
8
2
1
3
4
5
6
7
8
9
10
section
Integrated 10/100 4-Port Switch
The Router has a built-in, four-port network switch to allow your
wired computers to share printers, data and MP3 files, digital photos,
and much more. The switch features automatic detection so it will
adjust to the speed of connected devices. The switch will transfer
data between computers and the Internet simultaneously without
interrupting or consuming resources.
Universal Plug and Play (UPnP)
UPnP is a technology that offers seamless operation of voice
messaging, video messaging, games, and other applications that
are UPnP-compliant.
Support for VPN Pass-Through
If you connect to your office network from home using a VPN
connection, your Router will allow your VPN-equipped computer to
pass through the Router and to your office network.
Built-In Dynamic Host Configuration Protocol (DHCP)
Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes
for the easiest possible connection of a network. The DHCP server
will assign IP addresses to each computer automatically so there is
no need for a complicated networking setup.
Setup Assistant
The Setup Assistant, second generation of Belkin’s renowned Easy
Install Wizard, takes the guesswork out of setting up your Router.
This automatic software determines your network settings for you
and sets up the Router for connection to your Internet Service
Provider (ISP). In a matter of minutes, your Router will be up and
running on the Internet.
Note:
Setup Assistant software is compatible with Windows 2000, XP,
and Vista; and Mac OS X v10.x.
If you are using another operating
system, the Router can be set up using the Alternate Setup Method
described in this User Manual (see page 23).
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 104
Product Overview
Integrated N Wireless Access Point
N MIMO is an exciting new wireless technology based on the draft
IEEE 802.11n specification. It employs MIMO (Multiple Input Multiple
Output) smart-antenna technology that achieves data rates of up to
300Mbps.* Actual throughput is typically lower than the connected
data rate and will vary depending on your networking environment.
*
NOTE
: The standard transmission rate—300Mbps—is the physical
data rate. Actual data throughput will be lower.
MAC Address Filtering
For added security, you can set up a list of MAC addresses (unique
client identifiers) that are allowed access to your network. Every
computer has its own MAC address. Simply enter these MAC
addresses into a list using the Web-Based Advanced User Interface
and you can control access to your network.
9
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 104
Package Contents
Belkin N Wireless Router
Quick Installation Guide
Belkin Setup Assistant Software CD
RJ45 Ethernet Networking Cable
Power Supply
User Manual on the Setup Assistant CD
Network Status Display Guide
Wireless Security Setup Guide
System Requirements
Broadband Internet connection such as a cable or DSL modem
with RJ45 (Ethernet) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ45 Ethernet networking cable
Internet browser
Setup Assistant Software System Requirements
A computer running Windows
®
2000, XP, or Vista
TM
; or
Mac OS
®
X v10.x
Minimum 1GHz processor and 128MB RAM
Internet browser
Knowing your Router
10
section
2
1
3
4
5
6
7
8
9
10
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 104
11
Knowing your Router
The Router has been designed to be placed on a desktop. All of the
cables exit from the rear of the Router for better organization and
utility. The Network Status Display is easily visible on the FRONT
of the Router to provide you with information about network activity
and status. See the Network Status Display Guide for more
detailed information.
(A)
(B)
(C)
(D)
(E)
(F )
A.
Wireless Security
OFF
Wireless security is off
Solid Blue
Wireless security is on
B.
Wireless-Computer Status
OFF
Wireless computer is not present
Solid Blue
Wireless computer is connected to
the Router
Blinking Amber
Problem with wireless computer
connecting properly to the Router
C.
Wired-Computer Status
OFF
Wired computer is not present
Solid Blue
Wired computer is connected to
the Router
Blinking Amber
Problem with wired computer connecting
properly to the Router
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 104
Knowing your Router
12
section
2
1
3
4
5
6
7
8
9
10
D.
Router/Power Status
When you apply power to the Router or restart it, a short period of
time elapses while the Router boots up. During this time, the “router”
icon blinks. When the Router has completely booted up, the “router”
icon becomes a solid light, indicating the Router is ready for use.
OFF
Router is off
Blinking Blue
Router is booting up
Solid Blue
Router is on and ready
E.
Modem Status
This icon lights in blue to indicate that your modem is connected
properly to the Router. It turns amber when problem is detected.
OFF
Router is NOT connected to modem
Solid Blue
Router is connected to modem and
functioning properly
Blinking Amber
Problem with modem
F.
Internet Status
This unique icon shows you when the Router is connected to the
Internet. When the light is off, the Router is NOT connected to the
Internet. When the light is blinking amber, the Router is attempting
to connect to the Internet. When the light is solid blue, the Router
is connected to the Internet. When using the “Disconnect after x
minutes” feature, this icon becomes extremely useful in monitoring
the status of your Router’s connection.
OFF
Router is NOT connected to the Internet
Blinking Amber
Router is attempting to connect to
the Internet
Solid Blue
Router is connected to the Internet
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top