1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D8232-4v2
    5. /
  5. 8
Page 36 / 114 Scroll up to view Page 31 - 35
32
Alternate Setup Method
(10)
(5)
(4)
(3)
(7)
(6)
(1)
(2)
(9)
(8)
1.
Quick-Navigation Links
You can go directly to any of the N1 Vision’s advanced UI
pages by clicking directly on these links. The links are divided
into logical categories and grouped by tabs to make finding a
particular setting easier to find. Clicking on the purple header of
each tab will show you a short description of the tab’s function.
2.
Home Button
The home button is available in every page of the UI. Pressing
this button will take you back to the home page.
3.
Internet-Status Indicator
This indicator is visible in all pages of the N1 Vision, indicating
the connection status of the N1 Vision. When the indicator says
“Connected” in blue, the N1 Vision is connected to the Internet.
When the N1 Vision is not connected to the Internet, the indicator
will read “No Connection” in RED. The indicator is automatically
updated when you make changes to the settings of the N1 Vision.
4.
Login/Logout Button
This button enables you to log in and out of the N1 Vision with
the press of one button. When you are logged into the N1 Vision,
this button will change to read “Logout”. Logging into the N1
Vision will take you to a separate login page where you will need
Page 37 / 114
33
Alternate Setup Method
section
1
9
2
3
4
5
6
7
8
10
to enter a password. When you are logged into the N1 Vision,
you can make changes to the settings. When you are finished
making changes, you can log out of the N1 Vision by clicking the
“Logout” button. For more information about logging into the N1
Vision, see the section called “Logging into the N1 Vision”.
5.
Help Button
The “Help” button gives you access to the N1 Vision’s help
pages. Help is also available on many pages by clicking “more
info” next to certain sections of each page.
6.
LAN Settings
Shows you the settings of the Local Area Network (LAN) side of
the N1 Vision. Changes can be made to the settings by clicking
on any one of the links (IP Address, Subnet Mask, DHCP Server)
or by clicking the “LAN” quick-navigation link on the left side of
the screen.
7.
Features
Shows the status of the N1 Vision’s NAT, firewall, and wireless
features. Changes can be made to the settings by clicking on any
one of the links or by clicking the quick-navigation links on the
left side of the screen.
8.
Internet Settings
Shows the settings of the Internet/WAN side of the N1 Vision that
connects to the Internet. Changes to any of these settings can
be made by clicking on the links or by clicking on the “Internet/
WAN” quick-navigation link on the left side of the screen.
9.
Version Info
Shows the firmware version, boot-code version, hardware
version, and serial number of the N1 Vision.
10. Page Name
The page you are on can be identified by this name. This User
Manual will sometimes refer to pages by name. For instance
“LAN > LAN Settings” refers to the “LAN Settings” page.
Page 38 / 114
34
Alternate Setup Method
Step 4
Configuring your N1 Vision for Connection to your
Internet Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your N1 Vision to
connect to your Internet Service Provider (ISP). The N1 Vision is
capable of connecting to virtually any ISP’s system provided you have
correctly configured the N1 Vision’s settings for your ISP’s connection
type. Your ISP connection settings are provided to you by your ISP.
To configure the N1 Vision with the settings that your ISP gave you,
click “Connection Type”
(A)
on the left side of the screen. Select
the connection type you use. If your ISP gave you DNS settings,
clicking “DNS”
(B)
allows you to enter DNS address entries for ISPs
that require specific settings. Clicking “MAC Address”
(C)
will let you
clone your computer’s MAC address or type in a specific WAN MAC
address, if required by your ISP. When you have finished making
settings, the “Internet Status” indicator will read “connection OK” if
your N1 Vision is set up properly.
(A)
(B)
(C)
Page 39 / 114
35
Alternate Setup Method
section
1
9
2
3
4
5
6
7
8
10
Setting your Connection Type
From the “Connection Type” page, you can select the type of connection
you use. Select the type of connection you use by clicking the button
(1)
next to your connection type and then clicking “Next”
(2)
.
(2)
(1)
Page 40 / 114
36
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection
Type to Dynamic IP
A dynamic connection type is the most common connection type found with
cable modems. Setting the connection type to “dynamic” in many cases is
enough to complete the connection to your ISP. Some dynamic connection
types may require a host name. You can enter your host name in the space
provided if you were assigned one. Your host name is assigned by your ISP.
Some dynamic connections may require that you clone the MAC address of
the PC that was originally connected to the modem.
1.
Host Name
This space is provided to enter a host name that needs to be
visible to your ISP. Enter your host name here and click “Apply
Changes”
(3)
. If your ISP did not assign you a host name, or you
are not sure, leave this blank.
2.
Change WAN MAC Address
If your ISP requires a specific MAC address to connect to the
service, you can enter a specific MAC address or clone the
current computer’s MAC address through this link.
(2)
(1)
(3)

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top