Page 81 / 105
Scroll up to view Page 76 - 80
79
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
5�
If “Manually” is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
(1)
(3)
(4)
(2)
6�
If not already selected, select “Using DHCP” next to “Configure:”
(3)
, then click “Apply Now”�
Your network adapter(s) are now configured for use with the Router�
Page 82 / 105
80
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
9
10
RECOMMENDED WEB BROWSER SETTINGS
8
In most cases, you will not need to make any changes to your web browser’s settings� If you are having trouble accessing the Internet or the
Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section�
Internet Explorer 4�0 or Higher
1�
Start your web browser� Select “Tools” then “Internet Options”�
2�
In the “Internet Options” screen, there are three selections: “Never
dial a connection”, “Dial whenever a network connection is not
present”, and “Always dial my default connection”� If you can make
a selection, select “Never dial a connection”� If you cannot make a
selection, go to the next step�
Page 83 / 105
81
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
9
10
8
RECOMMENDED WEB BROWSER SETTINGS
3�
Under the “Internet Options” screen, click on “Connections” and
select “LAN Settings…”�
4�
Make sure there are no check marks next to any of the displayed
options: “Automatically detect settings”, “Use automatic
configuration script”, and “Use a proxy server”� Click “OK”� Then
click “OK” again in the “Internet Options” page�
Netscape
®
Navigator
®
4�0 or Higher
1�
Start Netscape� Click on “Edit” then “Preferences”�
2�
In the “Preferences” window, click on “Advanced” then select
“Proxies”� In the “Proxies” window, select “Direct connection to
the Internet”�
Page 84 / 105
82
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
TROUBLESHOOTING
9
Problem:
Installation CD does not automatically start�
Solution:
If the CD-ROM does not start the Setup Assistant automatically, it could be that the
computer is running other applications that are interfering with the CD drive�
2�
Next, double-click on the CD-ROM drive that the Setup Assistant
Software CD has been placed in to start the installation�
1�
If the Setup Assistant
screen does not appear
within 15–20 seconds, open
up your CD-ROM drive
by double-clicking on the
“My Computer” icon that is
located on your desktop�
Page 85 / 105
83
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
9
TROUBLESHOOTING
3�
The Setup Assistant should start within a few seconds� If,
instead, a window appears showing the files on the CD,
double-click on the icon labeled “SetupAssistant�exe”�
4�
If the Setup Assistant still does not start, reference
the section titled “Manually Configuring Network
Settings” (page 75 of this User Manual) for an alternate
setup method�
19216811.live