Page 46 / 105 Scroll up to view Page 41 - 45
44
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service Set
Identifier) is used� The default SSID of the Router is “belkin54g”� You
can change this to anything you want to or you can leave it unchanged�
If there are other wireless networks operating in your area, you will want
to make sure that your SSID is unique (does not match that of another
wireless network in the area)� To change the SSID, type the SSID that
you want to use in the “SSID” field
(1)
and click “Apply Changes”
(2)
The change is immediate� If you make a change to the SSID, your
wireless-equipped computers may also need to be reconfigured to
connect to your new network name� Refer to the documentation of your
wireless network adapter for information on making this change�
(2)
(1)
Page 47 / 105
45
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
SSID Broadcast Feature
Note: This advanced feature should be employed by advanced
users only�
For security, you can choose not to broadcast your network’s SSID�
Doing so will keep your network name hidden from computers that
are scanning for the presence of wireless networks� To turn off the
broadcast of the SSID, select “Disable”, and then click “Apply Changes”�
Each computer now needs to be set to connect to your specific SSID; an
SSID of “ANY” will no longer be accepted� Refer to the documentation of
your wireless network adapter for information on making this change�
Using the Wireless Mode Switch
Your Router can operate in three different wireless modes: “Mixed
(11b+11g)”, “11g Only”, “11b Only”, and “Off”� The different modes are
explained below�
Page 48 / 105
46
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
11b Only Mode
We recommend you DO NOT use this mode unless you have a very
specific reason to do so� This mode exists only to solve unique problems
that may occur with some 802�11b client adapters and is NOT necessary
for interoperability of 802�11g and 802�11b standards�
When to Use 11b Only Mode
In some cases, older 802�11b clients may not be compatible with 802�11g
wireless� These adapters tend to be of inferior design and may use
older drivers or technology� Switching to this mode can solve problems
that sometimes occur with these clients� If you suspect that you are
using a client adapter that falls into this category of adapters, first
check with the adapter vendor to see if there is a driver update� If there
is no driver update available, switching to b only mode may fix your
problem�
Please note that switching to 11b only mode will decrease
802�11g performance�
Off
This option will turn off wireless functionality�
Mixed (11b+11g) Mode
In this mode, the Router is compatible with 802�11b and 802�11g wireless
clients simultaneously� This is the factory default mode and ensures
successful operation with all Wi-Fi-compatible devices� If you have a
mix of 802�11b and 802�11g clients in your network, we recommend
setting the Router to mixed (11b+11g) mode� This setting should only be
changed if you have a specific reason to do so�
11g Only Mode
11g mode works with 802�11g clients only� This mode is recommended
only if you want to prevent 802�11b clients from accessing your network�
To switch modes, select the desired mode from the “Wireless Mode”
drop-down box� Then, click “Apply Changes”�
Page 49 / 105
47
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing the Wireless Channel
There are a number of operating channels you can choose from� In the
United States, there are 11 channels� In Australia, the United Kingdom,
and most of Europe, there are 13 channels� In a small number of
other countries, there are other channel requirements� Your Router
is configured to operate on the proper channels for the country you
reside in� The default channel is “Auto”� The channel can be changed if
needed� If there are other wireless networks operating in your area, your
network should be set to operate on a channel that is different than the
other wireless networks� For best performance, use a channel that is at
least five channels away from the other wireless network� For instance,
if another network is operating on channel 11, then set your network to
channel 6 or below� To change the channel, select the channel from the
drop-down list� Click “Apply Changes”�
Page 50 / 105
48
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Protected Mode Switch
As part of the 802�11g specification, Protected mode ensures proper
operation of 802�11g clients and access points when there is heavy
802�11b traffic in the operating environment� When Protected mode is
ON, 802�11g scans for other wireless network traffic before it transmits
data� Therefore, using this mode in environments with HEAVY 802�11b
traffic or interference achieves best performance results� If you are in an
environment with very little—or no—other wireless network traffic, your
best performance will be achieved with Protected mode OFF�

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top