1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D7231-4v5
    5. /
  5. 4
Page 16 / 133 Scroll up to view Page 11 - 15
14
Connecting and Configuring Your Router
Verify the contents of your box. You should have the following:
•
Belkin High-Speed Mode Wireless G Router
•
Quick Installation Guide
•
Belkin Easy Install Wizard Software CD
•
RJ45 Ethernet Networking Cable (for connection of the
Router to the computer)
•
Power Supply
•
User Manual
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port. Many modems have both an RJ45 Ethernet port and a USB
connection. If you have a modem with both Ethernet and USB, and
are using the USB connection at this time, you will be instructed to
use the RJ45 Ethernet port during the installation procedure. If your
modem has only a USB port, you can request a different type of
modem from your ISP, or you can, in some cases, purchase a modem
that has an RJ45 Ethernet port on it.
ALWAYS INSTALL YOUR ROUTER FIRST!
IF YOU ARE INSTALLING
NUMEROUS NETWORK DEVICES FOR THE FIRST TIME, IT IS
IMPORTANT THAT YOUR ROUTER IS CONNECTED AND RUNNING
BEFORE ATTEMPTING TO INSTALL OTHER NETWORK COMPONENTS
SUCH AS NOTEBOOK CARDS AND DESKTOP CARDS.
Easy Install Wizard
Belkin has provided our Easy Install Wizard software to make
installing your Router a simple and easy task. You can use it to get
your Router up and running in minutes.
The Easy Install Wizard requires that your Windows® 98SE, Me,
2000, XP or Mac OS 9.2x, X.1.x computer be connected directly to
your cable or DSL modem and that the Internet connection is active
Ethernet
USB
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 133
Connecting and Configuring Your Router
15
section
2
1
3
4
5
6
7
8
9
10
11
12
and working at the time of installation. If it is not, you must use the
“Alternate Setup Method” section of this manual to configure your
Router. Additionally, if you are using an operating system other than
Windows 98SE, Me, 2000, or XP, you must set up the Router using
the “Alternate Setup Method” section of this manual.
IMPORTANT:
Run the Easy Install Wizard software from the
computer that is directly connected to the cable or DSL modem.
DO NOT CONNECT THE ROUTER AT THIS TIME.
Step 1
Run the Easy Install Wizard Software
1.
Shut down any programs that are running on your computer at
this time.
2.
Make sure you have the following items at the computer that is
now directly connected to the cable or DSL modem. DO NOT
CONNECT THE ROUTER AT THIS TIME.
• Quick Installation Guide
• The Easy Install Wizard CD-ROM
• The Router
• The Router power supply
• RJ45 Ethernet networking cable
• This User Manual
3.
Turn off any firewall or Internet connection sharing software on
your computer.
4.
Insert the Easy Install Wizard software CD into your CD–ROM
drive. The Easy Installation Wizard screen will automatically
appear on your screen within 15 seconds. If it does not, select
your CD-ROM drive from “My Computer” and double-click on the
file named “EasyInstall.exe” on the CD-ROM.
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 133
16
Connecting and Configuring Your Router
Welcome Screen
After you insert the CD into your CD-ROM drive, the Wizard’s
welcome screen will appear. Make sure you have not connected
the Router at this point. If you have connected your Router, please
reconnect your computer directly to the modem. Click “Next” when
you are ready to move on.
Progress Screen
Easy Install will show you a progress
screen each time a step in the setup
has been completed. Each time you see
the progress screen, click “Next” when
you are ready to move to the next step.
Examining Settings
The Wizard will now examine your
computer’s network settings and gather
information needed to complete the
Router’s connection to the Internet.
When the Wizard is finished examining
your computer, click “Next” to continue.
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 133
Connecting and Configuring Your Router
17
section
2
1
3
4
5
6
7
8
9
10
11
12
Multi-NICs Screen
If you have more than one network adapter installed in your computer
a Multi-NIC Screen will appear. If you have more than one network
adapter installed in your computer, the Wizard will need to know which
adapter is connected to your modem. Select the network card that is
connected to your modem from the list and click “Next”. If you are not
sure which adapter to choose, select the adapter at the top of the list.
If you mistakenly choose the wrong adapter now, you will be able to
choose a different one later.
Step 2
Hardware Setup
The Wizard will walk you through connecting your Router to your
computer and modem. Follow the steps on the screen using the
pictures as a guide.
2.1
This step instructs you to locate
the cable connected between your
modem and the networking port on
your computer. Unplug this cable
from the computer and plug it into
the GREEN port on the Router.
Click “Next” to continue.
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 133
18
Connecting and Configuring Your Router
2.2
This step instructs you to locate
the BLUE cable that is included
with your Router. Plug one end
of this cable into ANY one of the
BLUE ports on your Router. Plug
the other end of the cable into the
networking port on your computer.
Click “Next” to continue.
2.3
This step instructs you to locate
the power supply that is included
with your Router. Plug the power
supply’s small connector into the
GRAY port on the Router. Plug the
power supply into an empty power
outlet. Click “Next” to continue.
2.4
This step instructs you to look
at the lights on the front of your
Router. Make sure the appropriate
lights are ON. Refer to the Easy
Install software on your computer’s
screen for more details. Click
“Next” to continue.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top