1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F1P1242EGau
    5. /
  5. 10
Page 46 / 52 Scroll up to view Page 41 - 45
88
Appendices
Appendices
89
section
2
1
3
4
5
6
7
Manual IP Configuration
1.
Follow steps 1-5 in “DHCP IP Configuration” on the previous
page.
2.
Select “Use the following IP address.” Enter an IP address based
on the default network
which is 10.1.1.x (where x is between
2 and 254), use 255.255.255.0 for the subnet mask and the IP
address of the VoIP Router 10.1.1.1 for the Default gateway field.
Your computer is now configured to connect to the VoIP Router.
Configuring Your Computer in Windows XP
DHCP IP Configuration
1.
On the Windows desktop, click Start/Control Panel.
2.
In the Control Panel window, click Network Connections or
click Network and Internet Connections and then Network
Connections.
3.
The Network Connections window will open. Locate and double-
click the Local Area Connection icon for the Ethernet or Wireless
adapter that is connected to the VoIP Router.
4.
In the connection status screen, click Properties.
5.
Double-click Internet Protocol (TCP/IP).
6.
If “Obtain an IP address automatically” and “Obtain DNS server
address automatically” are already selected, your computer is
already configured for DHCP. Click Cancel to close each window.
Downloaded from
www.Manualslib.com
manuals search engine
Page 47 / 52
90
Appendices
Appendices
91
section
2
1
3
4
5
6
7
Your computer is now configured to connect to the VoIP Router.
Configuring Your Macintosh Computer
You may find that the instructions here do not exactly match your
operating system. This is because these steps and screen shots were
created using Mac OS 10.2. Mac OS 7.x and above are similar, but
may not be identical to the Mac OS you are using.
Follow these instructions:
1.
Open the Systems Preferences window.
3.
Select “Use the following DNS server addresses.”
4.
Enter the IP address for the VoIP Router in the Preferred DNS
server field. This automatically relays DNS requests to the DNS
server(s) provided by your ISP. also, add a specific DNS server
of your ISP into the Alternate DNS Server field and click OK to
close the dialog boxes.
5.
For future reference you may record the configured information in
the following table.
TCP/IP Configuration Setting
IP Address
____.____.____.____
Subnet Mask
____.____.____.____
Default Gateway
____.____.____.____
Preferred DNS Server
____.____.____.____
Alternate DNS Server
____.____.____.____
Disable HTTP Proxy
You need to verify that the “HTTP Proxy” feature of your web browser
is disabled. This is so that your browser can view the VoIP Router’s
HTML configuration pages.
6.
Open control panel.
7.
Open internet options
8.
Go to the connections tab and click on the LAN settings button.
9.
Ensure that NOTHING is ticked on this screen and click ok.
10. On the connections tab, make sure that there are no dial up
connections, select the “Never dial a connection” radio button.
Downloaded from
www.Manualslib.com
manuals search engine
Page 48 / 52
92
Appendices
Appendices
93
section
2
1
3
4
5
6
7
Internet Explorer
1.
Open Internet Explorer and click the Stop button. Click
Explorer/Preferences.
2.
In the Internet Explorer Preferences window, under Network,
select Proxies.
3.
Uncheck all check boxes and click OK.
2.
Double Click “Network”
3.
If “Using DHCP Server” is already selected in the configure field,
your computer is already configured for DHCP. If not, select this
option.
4.
Your new settings are shown in the TCP/IP tab. Verify that your
IP Address is now 10.1.1.xxx, your Subnet Mask is 255.0.0.0
or 255.255.255.0 and your Default Gateway is 10.1.1.1. These
values confirm that your VoIP Router is functioning.
5.
Close the Network window.
Now your computer is configured to connect to the VoIP Router.
Disable HTTP Proxy
You need to verify that the “HTTP Proxy” feature of your web browser is
disabled. This is so that your browser can view the VoIP Router’s HTML
configuration pages. The following steps are for Internet Explorer.
Downloaded from
www.Manualslib.com
manuals search engine
Page 49 / 52
94
Appendices
Appendices
95
section
2
1
3
4
5
6
7
Appendix A2 Troubleshooting
This section describes common problems you may encounter and
possible solutions to them. The VoIP Router can be easily monitored
through panel indicators to identify problems.
Troubleshooting
Symptom
Action
LED Indicators
POWER LED is Off
• Check connections between the VoIP
Router, the external power supply, and the
wall outlet.
•
If the power indicator does not turn on when
the power cord is plugged in, you may have
a problem with the power outlet, power cord,
or external power supply. However, if the unit
powers off after running for a while, check
for loose power connections, power losses,
or surges at the power outlet. If you still
cannot isolate the problem, then the external
power supply may be defective. In this case,
contact Technical Support for assistance.
Troubleshooting
Symptom
Action
LED Indicators
LAN LED is Off
• Verify that the VoIP Router and attached
device are powered on.
•
Be sure the cable is plugged into both the
VoIP Router and the corresponding device.
•
Verify that the proper cable type is used and
that its length does not exceed the specified
limits.
•
Be sure that the network interface on the
attached device is configured for the proper
communication speed and duplex mode.
• Check the adapter on the attached device
and cable connections for possible defects.
Replace any defective adapter or cable if
necessary.
Network Connection
Problems
Cannot ping the
•
Verify that the IP addresses are properly
VoIP Router from
configured. For most applications, you
the attached LAN,
should use the VoIP Router’s DHCP function
or the VoIP Router
to dynamically assign IP addresses to
cannot ping any
hosts on the attached LAN. However, if you
device on the
manually configure IP addresses on the
attached LAN
LAN, verify that the same network address
(network component of the IP address) and
subnet mask are used for both the VoIP
Router and any attached LAN devices.
•
Be sure the device you want to ping (or
from which you are pinging) has been
configured for TCP/IP.
• Disable any installed Firewalls
Troubleshooting
Symptom
Action
Management Problems
Cannot connect
•
Be sure to have configured the VoIP Router
using the Web
with a valid IP address, subnet mask, and
browser
default gateway.
• Check that you have a valid network
connection to the VoIP Router and that the
port you are using has not been disabled.
• Check the network cabling between the
management station and the VoIP Router.
• Disable any installed Firewalls.
• Disable any proxies
Forgot or lost
•
Press the Reset button on the rear panel
the password
(holding it down for at least 20 seconds) to
restore the factory defaults. Note:
All
settings will need to be re-entered – this
option wipes all settings and restore the unit
back to the factory defaults.
Downloaded from
www.Manualslib.com
manuals search engine
Page 50 / 52
96
Appendices
Appendices
97
section
2
1
3
4
5
6
7
Appendix C Specifications
Standards Compliance
CE Mark
Emissions
FCC Class B, VCCI Class B
Industry Canada Class B
EN55022 (CISPR 22) Class B
C-Tick - AS/NZS 3548 (1995) Class B
Immunity
EN 61000-3-2/3
EN 61000-4-2/3/4/5/6/8/11
Safety
UL 1950
EN60950 (TÜV)
CSA 22.2 No. 950
IEEE 802.3 10 BASE-T Ethernet
IEEE 802.3u 100 BASE-TX Fast Ethernet
Modem Standards
ITU G.992.1 (G.dmt)
ITU G.992.2 (G.lite)
ITU G.994.1 (G.handshake)
ITU T.413 issue 2 - ADSL full rate
LAN Interface
RJ-45 10 BASE-T/100 BASE-TX ports
Auto-negotiates the connection speed to 10 Mbps Ethernet or
100 Mbps
Fast Ethernet, and the transmission mode to half-duplex or
full-duplex
USB Interface
1 USB port (F1PI210ENau only)
WAN Interface
1 ADSL RJ-11 port
FXO Interface
1 FXO port
Appendix B Cables
Ethernet Cable
Caution:
Do not plug a phone jack connector into an RJ-45 port.
For Ethernet connections, use only twisted-pair cables with RJ-45
connectors that conform to FCC standards.
Specifications
Cable Types and Specifications
Cable
Type
Max. Length
Connector
10BASE-T
Cat. 3, 4, 5 100-ohm UTP
100 m (328 ft)
RJ-45
100BASE-TX
Cat. 5 100-ohm UTP
100 m (328 ft)
RJ-45
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top