1. Home
    2. /
  2. Manuals
    3. /
  3. BEC Technologies
    4. /
  4. BEC-7402GTM-MI
    5. /
  5. 28
Page 136 / 146 Scroll up to view Page 131 - 135
Chapter 4: Configuration
132
Check Emails
This function allows you to have the router check your POP3 mailbox for new Email messages.
The
Mail
LED on your router will light when it detects new messages waiting for download. You
may also view the status of this function using the
Status – Email Checking
section of the web
interface, which also provides details on the number of new messages waiting. See the
Status
section of this manual for more information.
~
Disable:
Check to disable the router’s Email checking function.
~
Enable:
Check to enable the routers Emailing checking function. The following fields will be
activated and required:
Account Name:
Enter the name (login) of the POP3 account you wish to check.. Normally, it is the
text in your email address before the "@" symbol. If you have trouble with it, please contact your
ISP.
Password:
Enter the account’s password.
POP3 Mail Server:
Enter your (POP) mail server name. You Internet Service Provider (ISP) or
network administrator will be able to supply you with this.
Interval:
Enter the value in minutes between periodic mail checks.
Automatically dial-out for checking emails:
When the function is enabled, your ADSL router will
connect to your ISP automatically to check emails if your Internet connection dropped. Please be
careful when using this feature if your ADSL service is charged by time online.
Page 137 / 146
Chapter 4: Configuration
133
Device Management
The Device Management advanced configuration settings allow you to control your router’s
security options and device monitoring features.
Embedded Web Server
HTTP Port:
This is the port number the router’s embedded web server (for web-based
configuration) will use. The default value is the standard HTTP port, 80. Users may specify an
alternative if, for example, they are running a web server on a PC within their LAN.
Management IP Address:
You may specify an IP address allowed to logon and access the
router’s web server. Setting the IP address to 0.0.0.0 will disable IP address restrictions,
allowing users to login from any IP address.
Expire to auto-logout:
Specify a time frame for the system to auto-logout the user’s
configuration session.
For Example:
User A changes HTTP port number to
100
, specifies their own IP address of
192.168.1.55
, and sets the logout time to be
100
seconds.
The router will only allow User A
access
from
the
IP
address
192.168.1.55
to
logon
to
the
Web
GUI
by
typing:
http://
192.168.1.254:100
in their web browser. After 100 seconds, the device will automatically
logout User A.
Page 138 / 146
Chapter 4: Configuration
134
Universal Plug and Play (UPnP)
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with
control and data transfer between devices. UPnP offers many advantages for users running
NAT routers through UPnP NAT Traversal, and on supported systems makes tasks such as port
forwarding much easier by letting the application control the required settings, removing the
need for the user to control advanced configuration of their device.
Both the user’s Operating System and the relevant application must support UPnP in addition to
the router. Windows XP and Windows Me natively support UPnP (when the component is
installed), and Windows 98 users may install the Internet Connection Sharing client from
Windows XP in order to support UPnP. Windows 2000 does not support UPnP.
~
Disable:
Check to disable the router’s UPnP functionality.
~
Enable:
Check to enable the router’s UPnP functionality.
UPnP Port:
Its default setting is 2800. It is highly recommended for users to use this port
value. If this value conflicts with other ports already being used you may wish to change the
port.
SNMP Access Control
(Software on a PC within the LAN is required in order to utilize this function) –
Simple Network Management Protocol.
SNMP V1 and V2:
Read Community:
Specify a name to be identified as the Read Community, and an IP address.
This community string will be checked against the string entered in the configuration file. Once
the string name is matched, user obtains this IP address will be able to view the data.
Write Community:
Specify a name to be identified as the Write Community, and an IP address.
This community string will be checked against the string entered in the configuration file. Once
the string name is matched, users from this IP address will be able to view and modify the data.
Trap Community:
Specify a name to be identified as the Trap Community, and an IP address.
This community string will be checked against the string entered in the configuration file. Once
the string name is matched, users from this IP address will be sent SNMP Traps.
SNMP V3:
Specify a name and password for authentication. And define the access right from identified IP
address. Once the authentication has succeeded, users from this IP address will be able to view
and modify the data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2
security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm
for "security", but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorization with fine granularity for remote
monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
Page 139 / 146
Chapter 4: Configuration
135
¾
From RFC 1213 (MIB-II):
;
System group
;
Interfaces group
;
Address Translation group
;
IP group
;
ICMP group
;
TCP group
;
UDP group
:
EGP (not applicable)
;
Transmission
;
SNMP group
¾
From RFC1650 (EtherLike-MIB):
;
dot3Stats
¾
From RFC 1493 (Bridge MIB):
;
dot1dBase group
;
dot1dTp group
;
dot1dStp group (if configured as spanning tree)
¾
From RFC 1471 (PPP/LCP MIB):
;
pppLink group
:
pppLqr group
¾
From RFC 1472 (PPP/Security MIB):
;
PPP Security Group)
¾
From RFC 1473 (PPP/IP MIB):
;
PPP IP Group
Page 140 / 146
Chapter 4: Configuration
136
¾
From RFC 1474 (PPP/Bridge MIB):
;
PPP Bridge Group
¾
From RFC1573 (IfMIB):
;
ifMIBObjects Group
¾
From RFC1695 (atmMIB):
;
atmMIBObjects
¾
From RFC 1907 (SNMPv2):
;
only snmpSetSerialNo OID

Rate

3.5 / 5 based on 2 votes.

Popular BEC Technologies Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top