BEC Technologies 7402GTMR4-SCED Router Manual PDF (Setup & Configuration Guide)

Page 131 / 146 Scroll up to view Page 126 - 130

Chapter 4: Configuration

127

Time Schedule

The Time Schedule supports up to 16 time slots which helps you to manage your Internet connection.

In

each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing

the usage of the Internet by users or applications.

This Time Schedule correlates closely with router’s time, since router does not have a real time clock on

board; it uses the Simple Network Time Protocol (SNTP) to get the current time from an SNTP server

from the Internet. Refer to

Time Zone

for details.

You router time should correspond with your local

time.

If the time is not set correctly, your Time Schedule will not function properly.

Page 132 / 146

Chapter 4: Configuration

128

Configuration of Time Schedule

Edit a Time Slot

1.

Choose any Time Slot (ID 1 to ID 16) to edit, click

Edit.

2.

A detailed setting of this Time Slot will be shown.

ID:

This is the index of the time slot.

Name:

A user-define description to identify this time portfolio.

Day:

The default is set from Monday through Friday.

You may specify the days for the schedule to

be applied.

Start Time:

The default is set at 8:00 AM.

You may specify the start time of the schedule.

End Time:

The default is set at 18:00 (6:00PM).

You may specify the end time of the schedule.

Select the

Apply

button to apply your changes.

Delete a Time Slot

Click

Clear

to delete the existing Time profile, i.e. erase the Day and back to default setting of

Start Time / End Time.

Click Edit

Page 133 / 146

Chapter 4: Configuration

129

Example:

I need to reserve a specific time period for allocating bandwidth for my VPN-PPTP connection during

weekdays except on Wednesday from 8:30AM to 1:45 PM (13:45 in 24hour clock) for business purpose.

But what should I do?

1.

Choose a Time Slot to edit.

2.

Give a name to this profile, example: PPTP

3. For

Day

, check boxes

Mon., Tur., Thu.

and

Fri.

4. For

Start Time

, set time to 8:30

5. For

End Time

, set time to 13:45

6.

Click

Apply

button to save this setting

Back to the

Time Schedule

page, you can see the time profile has just been created.

Note:

Watch it carefully, the days you have selected will present in capital letter.

Lower case letter

shows the day(s) is not selected, and no rule will apply on this day(s).

7.

Make sure your PPTP is set up correctly. See

VPN-PPTP

for more information.

8.

Make sure your Local Time is displayed correctly on the router’s homepage, Refer to

Time Zone

for

more information.

Make sure your QoS is set up correctly.

See

QoS

for more information.

Page 134 / 146

Chapter 4: Configuration

130

Advanced

Configuration options within the

Advanced

section are for users who wish to take advantage of the

more advanced features of the router. Users who do not understand the features should not attempt to

reconfigure their router, unless advised to do so by support staff.

There are four items within the

Advanced

section:

Static Route, Dynamic DNS

,

Checking Email,

Device Management

and

IGMP.

Static Routing

Click on

Routing Table

and then choose

Create Route

add a routing table.

Destination:

This is the destination subnet IP address.

Netmask:

Subnet mask of the destination IP addresses based on above destination subnet IP.

Gateway:

This is the gateway IP address to which packets are to be forwarded.

Interface:

Select the interface through which packets are to be forwarded.

Cost:

This is the same meaning as Hop. This should usually be left at 1.

Page 135 / 146

Chapter 4: Configuration

131

Dynamic DNS

The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname,

allowing users whose ISP does not assign them a static IP address to use a domain name. This is

especially useful for hosting servers via your ADSL connection, so that anyone wishing to connect

to you may use your domain name, rather than having to use your dynamic IP address, which

changes from time to time. This dynamic IP address is the WAN IP address of the router, which is

assigned to you by your ISP.

You will first need to register and establish an account with the Dynamic DNS provider using their

website, for example http://www.dyndns.org/

There are more than 5 DDNS services supported.

~

Disable:

Check to disable the Dynamic DNS function.

~

Enable:

Check to enable the Dynamic DNS function. The following fields will be activated

and required:

Dynamic DNS Server:

Select the DDNS service you have established an account with.

Domain Name, Username and Password:

Enter your registered domain name and your

username and password for this service.

Period:

Set the time period between updates, for the Router to exchange information with the

DDNS server. In addition to updating periodically as per your settings, the router will perform an

update when your dynamic IP address changes.

Via WAN Interface:

Decide which WAN interface you want to use for sending DDNS request.

Rate

Popular BEC Technologies Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share