1. Home
    2. /
  2. Manuals
    3. /
  3. Bandluxe
    4. /
  4. R505
    5. /
  5. 13
Page 61 / 65 Scroll up to view Page 56 - 60
Appendix C: Important Safety Information and Glossary
60
Appendix C: Important Safety
Information and Glossary
Europe – EU Declaration of Conformity
European Union Notice
Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC
Directive (2004/108/EC), and the Low Voltage Directive (2006/95/EC) issued by the
Commission of the European Community.
Compliance with these directives implies conformity to the following European
Norms (in parentheses are the equivalent international standards).
EN 60950-1 (IEC 60950-1)
Safety of Information Technology Equipment.
EN 300 328
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; data transmission equipment operating in the 2.4 GHz
ISM band and using spread spectrum modulation techniques.
EN 301 489-24
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 24: Specific conditions for IMT-2000 CDMA direct spread (UTRA) for mobile and
portable (UE) radio and ancillary equipment.
ETSI EN 301 511
Global system for mobile communications (GSM); Harmonised EN for mobile stations
in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2
of the R&TTE directive (1995/5/EC).
ETSI EN 301 489-1
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common technical requirements.
ETSI EN 301 489-7
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 7: Specific conditions for mobile and portable radio and ancillary equipment of
digital cellular radio telecommunications systems (GSM and DCS).
Page 62 / 65
Appendix C: Important Safety Information and Glossary
61
ETSI EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for 2.4 GHz wideband transmission systems.
ETSI EN 301 908-1 & -2
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third Generation cellular networks;
Part 1: Harmonised EN for IMT-2000, introduction and common requirements,
covering essential requirements of article 3.2 of the R&TTE Directive.
EN 50385
Product standard to demonstrate the compliance of radio base stations and fixed
terminal stations for wireless telecommunication systems with the basic restrictions or
the reference levels related to human exposure to radio frequency electromagnetic
fields (110 MHz - 40 GHz) - General public.
Federal Communication Commission
Interference Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Page 63 / 65
Appendix C: Important Safety Information and Glossary
62
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interference that may
cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
Page 64 / 65
Appendix C: Important Safety Information and Glossary
63
Glossary
2G:
Second-generation mobile networking technology. Represents a switchover from
analog to digital; most 2G networks use GSM.
3G:
Third-generation mobile networking technology that enables simultaneous
transfer of voice and non-voice data; most 3G networks use WCDMA.
3.5G:
A more recent standard of mobile networking technology; generally uses
HSDPA.
3.75G:
A more recent standard of mobile networking technology; generally uses
HSUPA.
APN (Access Point Name/Network):
Provides GPRS routing information. Consists
of:
Network ID: Identi
fi
es the external service requested by a GPRS user.
Mobile network operator ID: Speci
fi
es routing information.
ARFCN (Absolute Radio Frequency Channel Number):
The speci
fi
c ID numbers
for all radio channels used in cellular mobile communications.
bps (bits per second):
How data
fl
ow is measured.
CHAP (Challenge Handshake Authentication Protocol):
CHAP identifiers are
changed frequently and authentication can be requested by the server at any
time.
DNS (Domain Name System):
Helps route network traf
fi
c by making the addressing
process more user-friendly.
DHCP (Dynamic Host Con
fi
guration Protocol):
How devices obtain IP addresses
from a server.
DUN (Dial-Up Network):
Windows component that enables online access via a
modem.
EDGE (Enhanced Data GSM Environment/Enhanced Data for Global Evolution):
Advanced GPRS that delivers multimedia and other data needing greater
bandwidth at up to 237 kbps.
GPRS (General Packet Radio Service):
Delivers data in packets at up to 86 kbps.
GSM (Global System for Mobile Communications):
The most popular cellular
network, mostly operates in 850-900 or 1800-1900 MHz; the primary 2G system.
HSDPA (High Speed Downlink Packet Access):
Advanced WCDMA that delivers
downlink bandwidth intensive data at up to 7.2Mbps; typically associated with
3.5G.
HSUPA (High Speed Uplink Packet Access):
Advanced WCDMA that delivers
uplink bandwidth intensive data at up to 5.76Mbps; typically associated with
3.75G.
HSPA+ (High Speed Packet Access +):
This is also known as HSPA Evolved, is the
next step and is more focused on delivering data services enabling speeds of up
Page 65 / 65
Appendix C: Important Safety Information and Glossary
64
to 42Mbps in the downlink and 11Mbps in the uplink.
IMEI (International Mobile Equipment Identity):
A number unique to each
GSM/UMTS device that can be used block network access by a stolen mobile
device.
IP (Internet Protocol):
Routes packets over a network.
Kbps (Kilobits per second):
A data
fl
ow measure; 1024 bits/second.
LAN (Local Area Network):
A data network with limited range but good bandwidth.
Mbps (Megabits per second):
A data
fl
ow measure; 1,048,576 bits/second.
PAP (Password Authentication Protocol):
The difference between PAP
authentication and a manual or scripted login, is that PAP is not interactive. The
username and password are entered in the client's dialing software and sent as
one data package as soon as the modems have established a connection, rather
than the server sending a login prompt and waiting for a response.
PPP (Point-to-Point Protocol):
An internet connection method.
PIN (Personal Identity Number):
Four to eight digital numbers SIM card security
code; allows access to the carrier’s network.
Rx:
Shorthand for Reception.
SIM (Subscriber Identity Module):
A small card that contains key mobile device
identi
fi
cation, subscription and contact information.
Tx:
Shorthand for Transmission.
WCDMA (Wideband Code Division Multiple Access):
Advanced EDGE that
supports 384kbps data
fl
ow. Most 3G networks use this standard, the same as
UMTS.

Rate

4 / 5 based on 1 vote.

Popular Bandluxe Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top