Bandluxe R100 Router Manual PDF (Setup & Configuration Guide)

Page 41 / 65 Scroll up to view Page 36 - 40

Security Setup

40

QoS

QoS Control

Quality of service is the ability to provide different priorities to different

applications, users, or data flows, or to guarantee a certain level of

performance to a data flow.

Wireless

WMM Support:

If no devices on your network support WMM, select

Disabled

. Otherwise, keep the default,

Enabled

.

No Acknowledgement:

If the Router’s Acknowledgement feature is

disabled, the Router will not re-send data if an error occurs, then keep the

default,

Disabled

. Otherwise, select

Enabled

.

Internet Access Priority

You can set the Internet bandwidth priority for a variety of applications

and devices. There are four levels priority:

High

,

Medium

,

Normal

, and

Low

. To use the Internet Access policies you set, select

Enabled

.

Category

There are four categories available. Select one of the categories and

proceed to the instructions for your selection.

Page 42 / 65

Security Setup

41

To add an online games or applications:

1.

Select the appropriate online games or applications.

2.

Select the appropriate priority:

High

,

Medium

,

Normal

, or

Low

.

3.

Click

Add

to save your changes.

To add a new online games or applications:

1.

Select

Add a New Game/Application

.

2.

Enter any name to indicate the name of the entry.

3.

Enter the port range that the application will be using. You can have up to three

ranges to define for this bandwidth allocation. Port numbers can range from 1 to

65535.

4.

Select the protocol

TCP

or

UDP

, or select

Both

.

5.

Select the appropriate priority:

High

,

Medium

,

Normal

, or

Low

.

6.

Click

Add

to save your changes.

To add an MAC address:

1.

Enter a name for your device.

2.

Enter the MAC address of your device.

3.

Select the appropriate priority:

High

,

Medium

,

Normal

, or

Low

.

4.

Click

Add

to save your changes.

To add a Voice Device:

1.

Enter a name for your voice device.

2.

Enter the MAC address of your voice device.

3.

Select the appropriate priority:

High

,

Medium

,

Normal

, or

Low

.

4.

Click

Add

to save your changes.

Summary

This lists the QoS entries you have created for your applications and

devices. Select

Edit

to edit an item or

Remove

to remove the item.

Preset items cannot be edited.

Page 43 / 65

Admin Setup

42

Admin Setup

Management

Router Access

You can change the Router’s password here. Enter the password you want to set in

the

Router Password

field, and re-enter it in the

Re-Enter to confirm

field.

Then click

Save Settings

.

Web Access

Web Utility Access: HTTP

(HyperText Transport Protocol) is the

communications protocol used to connect to servers on the World Wide

Web.

HTTPs

uses SSL (Secured Socket Layer) to encrypt data

transmitted for higher security.

Web Utility Access via Wireless:

If you are using the Router in a public

domain where you are giving wireless access to your guests, you can

disable wireless access to the Router’s web-based utility. The wireless

Page 44 / 65

Admin Setup

43

access to the Router web-based utility can be disabled. If you disable the

setting, you are only able to access the web-based utility via a wired

connection.

Remote Access

Remote Management:

To access the Router remotely, from outside the

network, select

Enabled

.

Web Utility Access:

Choose to access the Router via

HTTP

or

HTTPs

.

Remote Upgrade:

To enable remote upgrade of the Router, select

Enabled

.

Allow Remote IP Address:

To allow any IP address to access to access

the Router, select Any IP Address. To allow a specific range of IP

addresses to access the Router, enter IP addresses.

Remote Management Port:

Enter the port number that will be open to

outside access.

UPnP

UPnP:

Universal Plug and Play (UPnP) is a set of computer network

protocols that allows compatible devices to be ready to work without any

configuration once they are connected to the network.

Allow Users to Configure:

To enable manual changes to the Router

while using the UPnP feature, keep the default setting,

Enabled

. To

disable manual changes, select

Disabled

.

Allow Users to Disable Internet Access:

To prohibit users from

accessing the Router web-based utilities, keep the default setting,

Disabled

. Otherwise, select

Enabled

.

Page 45 / 65

Admin Setup

44

Diagnosis

Log

The Router can keep logs of all traffic for your Internet connection. To

monitor the network, select

Enabled

.

You can view logs by clicking

View Log

. If you want to view logs in a

browser, enter an IP address in the

Logviewer IP Address

field. You can

enter this IP in a browser to view logs.

Ping Test

To check the status of a connection, enter the IP address or URL that you

want to ping in the

IP or URL Address

field, define the packet size you

want to use in the

Packet Size

field, And select the number of times you

wish to ping:

5

,

10

,

15

, or

Unlimited

. Click

Start Test

to begin the ping

test. A new screen displays the test results.

Traceroute Test

To test the performance of a connection, enter a URL or IP address in the

IP or URL Address

field, and click

Start Test

. A new screen displays the

test results.

Rate

Popular Bandluxe Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share