User Manual
Page 17
of 50
Setup the Device
When installing the router, find an area where there are enough electrical outlets for the
router, the main computer, and your other computer devices.
To setup the router:
1.
Plug one end of the Ethernet cable from the router’s ETHERNET
ETHERNET
ETHERNET
ETHERNET port and then plug
the other end into the Ethernet port in your computer.
2.
If you have another device you need to connect through wire into the router, use
another piece of Ethernet cable. Plug one end of the Ethernet cable from the
computer’s Ethernet port and then plug the other end into an available Ethernet
port in the router.
3.
Plug one end of the telephone cable from the POTS Splitter’s ADSL
ADSL
ADSL
ADSL port and then
plug the other end into the router’s DSL
DSL
DSL
DSL port.
POTS Splitter
POTS Splitter
POTS Splitter
POTS Splitter
Your phone line carries with it both phone calls and Internet signals. When you are using the Internet, the
connection produces high-pitched tones that can affect your voice calls when using the phone. Installing a
Plain Old Telephone Service (POTS) splitter separates the two signals and eliminates the noise.
To setup a telephone on the POTS Splitter:
To setup a telephone on the POTS Splitter:
To setup a telephone on the POTS Splitter:
To setup a telephone on the POTS Splitter:
a.
Locate the phone jack in your house.
b. Insert the POTS Splitter into the phone jack.
c. Plug one end of the telephone cable from the POTS Splitter’s TEL
TEL
TEL
TEL port and then plug the other end into
the telephone.