AVM FRITZ-Box-Fon-WLAN-7570 Router Manual PDF (Setup & Configuration Guide)

Page 81 / 159 Scroll up to view Page 76 - 80

Call Back on No Response (CCNR) on the ISDN Line

FRITZ!Box Fon WLAN 7570 vDSL

81

Callback requests can also be deleted manually, with the

oldest callback request being deleted first.

Enable Call Back on No Response (CCNR)

M

You have just dialed a number and hear a ring

tone.

5

If the call is not answered, within twenty seconds,

dial either the number

5

or

Rs37r

the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset. As soon as the party you

dialed completes the conversation being conduct-

ed from her or his phone, your phone rings.

N

Pick up the handset. The number of the remote

party is dialed again automatically.

Delete Callback Requests Manually

N

Pick up the handset.

r37r

Dial the sequence shown at left.

O

Hang up the handset.

Page 82 / 159

FRITZ!Box Fon WLAN 7570 vDSL

82

Alternating Between Calls

Whenever you have one active connection and one caller

on hold, you can switch from one call to the other as often

as you want using the Hold button.

Alternate Between Calls

Call 1

P

You are talking to Caller 1.

R

Press the Hold button. Caller 1 is now on hold.

M

To establish a second call, simply dial

ss

plus

the desired extension number for an internal call,

or the desired external number.

Call 2

P

If the call is answered, you can consult on this

line. The original caller is still on hold.

R2

To switch back from Caller 2 to Caller 1, dial the

sequence shown at left.

Call 1

P

Caller 1 is now active again and Caller 2 is on

hold.

R2

To switch back again from Caller 2 to Caller 1, dial

the same sequence. In this way you can alternate

between the two connections.

End Hold

O

The caller on hold hangs up. You can continue

talking on the active connection.

R1

You end the active connection by dialing the se-

quence shown at left. The call that was on hold is

now active again, and there is no call left on hold.

O

K

Call

P

You can also return to the call on hold by hanging

up the handset: this ends the currently active

connection. In this case the phone rings as soon

as you hang up. Pick up the handset again to re-

turn to the last call that was on hold.

Page 83 / 159

Three-Party Conference Call

FRITZ!Box Fon WLAN 7570 vDSL

83

Three-Party Conference Call

FRITZ!Box allows you to hold telephone conferences with

two other people at once. Two external and one internal

party, or two internal and one external party can conduct a

conference call with each other.

Hold a Three-Party Conference Call

N

Pick up the handset.

M

Dial the external number of the first party. Talk.

R

Press the Hold button.

M

To establish a second call, simply dial

ss

plus

the desired extension number for an internal call,

or the desired external number.

You can now conduct a second conversation while

your first call is on hold.

R3

Dial the sequence shown at left to begin a three-

party conference call.

D

Now all three participants can confer together. If

either of the other two parties hangs up, your con-

nection with the remaining participant remains

active.

O

You can end the three-party call by hanging up the

handset.

R2

You can also switch from the three-party call back

to the original two-party connection. Dial the se-

quence shown at left. This ends the three-party

conference. The connection that was active last

before you initiated the three-party conference is

now active again. The other call is on hold. You

can alternate between the two connections by

dialing the same sequence again.

Page 84 / 159

FRITZ!Box Fon WLAN 7570 vDSL

84

Consultation / Hold

The Consultation/Hold feature allows you to place an exist-

ing call on hold. You then may consult with someone else at

your workplace or dial a second call. The party on hold

does not hear the second conversation. Once you have fin-

ished the consultation, you can return to the original con-

nection.

Consultation / Hold

Call 1

P

You are talking to Caller 1.

R

Press the Hold button. Caller 1 is now on hold

and you can consult someone else.

M

To establish a second call, simply dial

ss

plus the desired extension number for an in-

ternal call, or the desired external number.

Call 2

P

If the call is answered, you can consult on

this line. The original caller is still on hold.

R

If the number you dialed is busy or the call is

not answered, press the Hold button again to

return to Caller 1.

R1

To switch back to Caller 1 after talking on the

second connection, dial the sequence shown

at left. Caller 1 is now active again.

If you return to Caller 1 by pressing the Hold button, the

connection to Caller 2 is not cleared down until Caller 2

hangs up.

End Consultation

Call 1

P

You can also return to Caller 1 by hanging up

the handset: this ends the connection to

Caller 2. In this case, your phone rings as

soon as you hang up. Pick up the handset to

return to Caller 1 again.

O

Hang up the handset to end the connection.

Page 85 / 159

Transferring Calls

FRITZ!Box Fon WLAN 7570 vDSL

85

Transferring Calls

The “Call Transfer” function allows you to transfer a connec-

tion from one of FRITZ!Box's extension to another.

Explicit Call Transfer (ECT)

Use the “Explicit Call Transfer” function to connect two ex-

ternal parties with each other while one connection is ac-

tive and the other is on hold. Then you can end your own

connection while the other two parties continue their con-

versation.

Transfer Calls

Call 1

P

You are talking to Caller 1.

R

Press the Hold button. Caller 1 is now on hold.

ss

<Ext.>

To establish a connection to Caller 2, dial the

star key twice and then her or his extension

number.

Call 2

P

You can now talk with the other Caller 2.

O

To transfer the Caller 1 to Caller 2, simply hang

up the handset.

Explicit Transfer of One Active and One Held Connection

N

Pick up the handset.

M

Dial the external number of the first party. Talk.

R

Press the Hold button.

M

Dial the number for your second external call. You can

now conduct a second conversation while your first

call is on hold.

To clear your connection while allowing the external

parties to continue the call, connect the parties with

each other.

R4

Dial the sequence shown at left. The connection on

hold and the active connection are connected with

each other. The external parties continue the call

while you clear the connection.

O

Hang up the handset.

Rate

Popular AVM Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share