1. Home
    2. /
  2. Manuals
    3. /
  3. Atlantis-Land
    4. /
  4. A02-RA243-W54M
    5. /
  5. 6
Page 26 / 88 Scroll up to view Page 21 - 25
WEBSHARE 243WM
20
3.4.2 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory.
The default values are
shown below.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP
server
function
Enabled
N/A
3.5 Information from the ISP
Before configuring this device, you have to check with your ISP (Internet Service Provider)
what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, Service Name, and Domain Name System
(DNS) IP address (it can be automatically assigned from
ISP or be set fixed).
PPPoA
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, and Domain Name System (DNS) IP
address (it can be automatically assigned from ISP or
be set fixed).
RFC1483 Bridged
VPI/VCI, VC-based/LLC-based multiplexing and configure
this product into BRIDGE Mode.
RFC1483 Routed
VPI/VCI, VC-based/LLC-based multiplexing, IP address,
Subnet mask, Gateway address, and Domain Name
System (DNS) IP address (it is fixed IP address).
IPoA
VPI/VCI, IP address, Subnet mask, Gateway address,
and Domain Name System (DNS) IP address (it is fixed
IP address).
3.6 Configuring with the Web Browser
Open the web browser, enter the local port IP address of this WebShare 243WM Wireless ,
which defaults at
, and click “
Go
”, a username and password window
will appear.
The default
username
&
password
are
admin
&
atlantis
, in respectively
Page 27 / 88
WEBSHARE 243WM
21
You will get a status report web page when login successfully.
At the configuration homepage, the left navigation page where bookmarks are provided links
you directly to the desired setup page, including:
•
Status (ARP Table, Routing Table, DHCP Table,
System Log, Security Log)
•
Quick Start
•
Configuration (LAN, WAN, System, Firewall, QoS, Virtual Server, Advanced)
•
Save Config to Flash
•
Language
Click on the desired item to expand the page in the main navigation page.
3.6.1 STATUS
The Status section provides and contains many items including device H/W and S/W
information, LAN, WAN, Port status and all defined interfaces. It also provides useful
information for users to review the status of device.
Click on
Status
will open all the following subsections:
•
ARP Table
•
Wireless Table
•
Routing Table
•
DHCP Table
•
System Log
•
Security Log
3.6.1.1 ARP Table/ Wireless Table
The router’s ARP (Address Resolution Protocol) Table shows the mapping of Internet (IP)
addresses to Ethernet (MAC) addresses. This is a quick way to determine the MAC address
of the network interface of your PCs to use with the router’s
Firewall – MAC Address Filter
function. See the Firewall section of this manual for more information.
Page 28 / 88
WEBSHARE 243WM
22
•
IP Address:
A list of IP addresses of devices on your LAN (Local Area Network).
•
MAC Address:
MAC (Media Access Control) address for each device on your LAN.
•
Interface:
The interface name (on the router) that this IP Address connects to.
•
Static:
Static status of the ARP table entry:
•
“
no
” for dynamically-generated ARP table entries
•
“
yes
” for static ARP table entries added by the user
3.6.1.2 Routing Table
Display the current routing paths of A02-RA243-W54M.
•
#:
Item number
•
Destination:
IP address of the destination network.
•
Netmask:
The destination netmask address.
•
Gateway/Interface
: IP address of the gateway or existing interface that this route
uses.
•
Cost:
The cost of transmission for routing purposes. The number need not be precise,
but it must be between 0 and 65535.
•
Interface:
Select the interface through which packets are forwarded.
3.6.1.3 DHCP Table
Page 29 / 88
WEBSHARE 243WM
23
•
Leased:
DHCP assigned IP addresses information.
•
IP Address:
IP addresses of devices on your LAN (Local Area Network).
•
MAC Address:
The MAC Address that you want to assign the fixed IP address
•
Client Host Name:
Expired IP addresses information
•
Register Time:
Register time information
3.6.1.4 System Log
Display the system logs cumulated till the present time. You can trace the historical
information through this function.
3.6.1.5 Security Log
Display the information of security logs. If hacker attacks your sever, he will be isolated by
the firewall function and the router will record related information. Hence, you know where
the hacker comes from.
Page 30 / 88
WEBSHARE 243WM
24
3.6.2 Quick Start Guide
For detailed instructions on configuring WAN settings, see the WAN section of this manual.
The information you need for the Quick Start wizard to get you online are your login (often in
the form of username@ispname), your password, and the encapsulation type.
Your ISP can supply all the details you need.
Alternatively, if you have deleted the current
WAN Connection in the WAN – ISP section of the interface, you can use the router’s PVC
Scan feature to determine the Encapsulation types offered by your ISP.
Connection
Encapsulation:
Select the encapsulation type your ISP uses or choose “
Auto Scan
”.
Click
Start
to begin scanning for encapsulation types offered by your ISP. If the scan is
successful, you are presented with a list of supported options.
•
VCI:
Enter the VCI assigned to you. This field may already be configured.
•
VPI:
Enter the VPI assigned to you. This field may already be configured.

Rate

4.5 / 5 based on 2 votes.

Popular Atlantis-Land Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top