Page 21 / 88
Scroll up to view Page 16 - 20
WEBSHARE 243WM
15
For Windows 2000
1.
Go to
Start / Settings / Control Panel
. In the Control Panel, double-click on
Network
and Dial-up Connections
.
2.
Double-click
LAN Area Connection
.
3.
In the
LAN Area Connection Status
window, click
Properties
.
Page 22 / 88
WEBSHARE 243WM
16
4.
Select
Internet Protocol (TCP/IP)
and click
Properties
.
5.
Select the
Obtain an IP address automatically
and the
Obtain DNS server
address automatically
radio buttons.
6.
Click
“OK”
to finish the configuration.
Page 23 / 88
WEBSHARE 243WM
17
For Windows XP
1.
Go to
Start / Control Panel
(in Classic View). In the Control Panel, double-click on
Network Connections.
2.
Double-click
Local Area Connection
3.
In the
LAN Area Connection Status
window, click
Properties
.
Page 24 / 88
WEBSHARE 243WM
18
4.
Select
Internet Protocol (TCP/IP)
and click
Properties
.
5.
Select the
Obtain an IP address automatically
and the
Obtain DNS server
address automatically
radio buttons
6.
Click
“OK”
to finish the configuration.
Page 25 / 88
WEBSHARE 243WM
19
3.4 Factory Default Settings
Before configurating this WebShare 243WM Wireless , you need to know the following
default settings.
•
Username:
admin
•
Password:
atlantis
•
IP address
(192.168.1.254), Subnet Mask (255.255.255.0)
•
DHCP Server:
enable
•
WAN=
PPPoA Routing, VPI=8, VCI=35, VC-Mux
•
SSSID=
A02-RA243-W54M
, Channel=
6
, WEP/WPA=
disable
3.4.1 Username and Password
The default username and password are
admin
and
atlantis
respectively.
If you ever forget the password to log in, you may press the RESET button to
restore the factory default settings. After turning the router on press the
Emergency/Failure Recovery Button on the back of the modem, and hold the
button in until all lights on the modem flash and it reboots with factory default
settings (approximately 10 seconds). The login will be reset to admin and the
password will be reset to admin, and the modem will be accessible via its
19216811.live