Page 86 / 88 Scroll up to view Page 81 - 85
WEBSHARE 243WM
80
APPENDIX B
Technical Features
Protocols
IP, NAT, ARP, ICMP, IGMP, DHCP(server, client and
relay), RIP1/2 , SNTP client, UPnP, Telnet server, SNMP
LAN port
4 x RJ45 10/100 Base-T ports
WAN port
RJ-11 (1 port ADSL)
Antenna
3*5dBi Antennas (R-SMA)
External buttons
Reset/Power Button
LED Indicators
Power, System, WLAN, 4 X Lan,
ADSL and PPP
Wireless
IEEE802.11g/IEEE802.11b (WDS)
Standard ADSL Compliance
ANSI T1.413 Issue 2, ITU-T G.992.1(Full Rate DMT), ITU-
T G.992.2 (Lite DMT), ITU-T G.994.1 (Multimode), ITU
G.992.3 (G.dmt.bis), ITU G.992.5 (G.dmt.bisplus)
Protocols ADSL
RFC2364(PPPoA), RFC2516(PPPoE) and RFC1483
ATM
ATM AAL2/AAL5 and ATM service class : CBR, UBR,
VBR-rt, VBR, ATM Forum UNI 3.0, 3.1 and 4.0
Firewall
Static Packet Filtering, URL Filtering, MAC Filtering and
NAT
VLAN
Per Port VLAN
QoS
QoS:
The Prioritization functions allow you to specify which
packets have priority and should not be delayed,
and/or which packets have low priority and should be
moved to the end of upload queues.
IP Throttling:
Using IP Throttling, bandwidth limits can be
enforced on any system within your LAN, or even on a
particular application
VPN
Pass Through
Input Power
12V DC @ 1A
Power Consumption
< 9watts
Agency and Regulatory
CE
Dimensions
175 x 129 x 39 mm3
Weight
350g
Operating Temperature
0° to 40°C
Storage Temperature
-10° to 70°C
Operating Humidity
5-95% non-condensing
Page 87 / 88
WEBSHARE 243WM
81
APPENDIX C
Firmware Recovery
The detail instruction in Emergency/Failure Recovery Button
1.
Recovery procedures for non-working routers (e.g. after a failed firmware upgrade
flash):
Hold the Emergency/Failure Recovery Button on the back of the modem in. Keep this
button held in and turn on the modem. Once the lights on the modem have stopped
flashing, release the Emergency/Failure Recovery Button. The modem's emergency-
reflash web interface will then be accessible via http://192.168.1.254/ where you can
upload a firmware image to restore the modem to a functional state. Please note that
the modem will only respond via its web interface at this address, and will not respond
to
ping
requests
from
your
PC
or
to
telnet
connections.
2.
Recovery
procedures
for
a
lost
web
interface
password:
After turning the router on press the Emergency/Failure Recovery Button on the back
of the modem, and hold the button in until all lights on the modem flash and it reboots
with factory default settings. The login will be reset to admin and the password will be
reset to admin, and the modem will be accessible via its default IP address at
Before powered on the router to enter the recovery process. please
configure the IP address of the PC as 192.168.1.1 and process step by
step.
1. Power the router off.
2. Hold the " Emergency/Failure Recovery Button”.
3. Power on the router. Then Router's IP will reset to Default (Say
192.168.1.254)
4. Upload the firmware.
Page 88 / 88
WEBSHARE 243WM
82
APPENDIX D
Support
If you have any problems with the WebShare 243WM Wireless , please consult this manual.
If you continue to have problems you should contact the dealer where you bought this ADSL
Router.
If you have any other questions you can contact the Atlantis Land company directly
at the following address:
Atlantis Land SpA
Viale De Gasperi, 122
20017 Mazzo di Rho(MI)
Tel: +39. 02.93906085, +39. 02.93907634(help desk)
Fax: +39. 02.93906161
Email:
or
WWW:

Rate

4.5 / 5 based on 2 votes.

Popular Atlantis-Land Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top