Page 96 / 129
Scroll up to view Page 91 - 95
¸µ
5.4
Download Master
Download Master is a utility that helps you download files even
while your laptops or other devices are switched off.
NOTE:
You need a USB device connected to the wireless router to use
Download Master.
To use Download Master:
1. Click
General
>
USB application
>
Download Master
to
download and install the utility automatically.
NOTE:
If you have more than one USB drive, select the USB device you
want to download the files to.
2. After the download process is finished, click the Download
Master icon to start using the utility.
3. Click
Add
to add a download task.
4. Select a download type such as BitTorrent, HTTP, or FTP. Provide
a torrent file or a URL to begin downloading.
NOTE:
For details on Bit Torrent, refer to section
5.4.1 Configuring the
Bit Torrent download settings
.
Page 97 / 129
¸¶
5. Use the navigation panel to configure the advanced settings.
To configure BitTorrent download settings:
1. From Download Master’s navigation panel, click
Bit Torrent
to
launch the
Bit Torrent Setting
page.
2. Select a specific port for your download task.
3. To prevent network congestion, you can limit the maximum
upload and download speeds under
Speed Limits
.
4. You can limit the maximum number of allowed peers and
enable or disable file encryption during downloads.
5.4.1 Configuring Bit Torrent download settings
Page 98 / 129
¸·
5.4.2 NZB settings
You can set up a USENET server to download NZB files. After
entering USENET settings,
Apply
.
Page 99 / 129
¸¸
6
Troubleshooting
This chapter provides solutions for issues you may encounter with
your router. If you encounter problems that are not mentioned in
this chapter, visit the ASUS support site at:
contact details of ASUS Technical Support.
6.1
Basic Troubleshooting
If you are having problems with your router, try these basic steps
in this section before looking for further solutions.
Upgrade Firmware to the latest version.
1. Launch the Web GUI. Go to
Advanced Settings
>
Administration
>
Firmware Upgrade
tab. Click
Check
to
verify if the latest firmware is available.
2. If the latest firmware is available, visit the ASUS global website
#download to download the latest firmware.
3. From the
Firmware Upgrade
page, click
Browse
to locate the
firmware file.
4. Click
Upload
to upgrade the firmware.
Page 100 / 129
100
Restart your network in the following sequence:
1. Turn off the modem.
2. Unplug the modem.
3. Turn off the router and computers.
4. Plug in the modem.
5. Turn on the modem and then wait for 2 minutes.
6. Turn on the router and then wait for 2 minutes.
7. Turn on computers.
Check if your Ethernet cables are plugged properly.
•
When the Ethernet cable connecting the router with the
modem is plugged in properly, the WAN LED will be on.
•
When the Ethernet cable connecting your powered-
on computer with the router is plugged in properly, the
corresponding LAN LED will be on.
Check if the wireless setting on your computer matches that
of your computer.
•
When you connect your computer to the router wirelessly,
ensure that the SSID (wireless network name), encryption
mehtod, and password are correct.
Check if your network settings are correct.
•
Each client on the network should have a valid IP address. ASUS
recommends that you use the wireless router’s DHCP server to
assign IP addresses to computers on your network.
19216811.live