Page 86 / 129
Scroll up to view Page 81 - 85
·µ
5.2
Firmware Restoration
Firmware Restoration is used on an ASUS Wireless Router that
failed during its firmware upgrading process. It uploads the
firmware that you specify. The process takes about three to four
minutes.
IMPORTANT:
Launch the rescue mode on the router before using the
Firmware Restoration utility.
NOTE:
This feature is not supported on MAC OS.
To launch the rescue mode and use the Firmware Restoration
utility:
1. Unplug the wireless router from the power source.
2. Hold the Reset button at the rear panel and simultaneously
replug the wireless router into the power source. Release the
Reset button when the Power LED at the front panel flashes
slowly, which indicates that the wireless router is in the rescue
mode.
Page 87 / 129
·¶
3. Set a static IP on your computer and use the following to set up
your TCP/IP settings:
IP address
: 192.168.1.x
Subnet mask
: 255.255.255.0
4. From your computer’s desktop, click
Start
>
All Programs
>
ASUS Utility RT-AC68U Wireless
Router
>
Firmware Restoration
.
5. Specify a firmware file, then click
Upload
.
NOTE
:
This is not a firmware upgrade utility and cannot be used on
a working ASUS Wireless Router. Normal firmware upgrades must be
done through the web interface. Refer to
Chapter 4: Configuring the
Advanced Settings
for more details.
5.3
Setting up your printer server
5.3.1 ASUS EZ Printer Sharing
ASUS EZ Printing Sharing utility allows you to connect a USB
printer to your wireless router’s USB port and set up the print
server. This allows your network clients to print and scan files
wirelessly.
Page 88 / 129
··
NOTE:
The print server function is supported on Windows® XP,
Windows® Vista, and Windows® 7.
To set up the EZ Printer sharing mode:
1. From the navigation panel, go to
General
>
USB Application
>
Network Printer Server
.
2. Click
Download Now!
to download the network printer utility.
NOTE:
Network printer utility is supported on Windows® XP, Windows®
Vista, and Windows® 7 only. To install the utility on Mac OS, select
Use
LPR protocol for sharing printer
.
3. Unzip the downloaded file and click the Printer icon to run the
network printer setup program.
Page 89 / 129
·¸
4. Follow the onscreen instructions to set up your hardware, then
click
Next
.
5. Wait a few minutes for the initial setup to finish. Click
Next
.
6. Click
Finish
to complete the installation.
Page 90 / 129
¸0
8. After the printer’s driver installation is complete, network
clients can now use the printer.
7. Follow the Windows
®
OS instructions to install the printer driver.
19216811.live