Page 46 / 69
Scroll up to view Page 41 - 45
46
Firmware Restoration
Firmware Restoration is used on an ASUS ADSL router that failed
during its firmware upgrading process. It uploads the firmware
that you specify. The process takes about three to four minutes.
To launch the rescue mode and use the Firmware
Restoration utility:
1. Unplug the ADSL router from the power source.
2.
Hold the Reset button at the rear panel and simultaneously
re-plug the ADSL router into the power source. Release the
Reset button when the Power LED at the front panel flashes
slowly, which indicates that the ADSL router is in the rescue
mode.
3.
Use the following to set up your TCP/IP settings:
IP address
: 192.168.1.x
Subnet mask
: 255.255.255.0
4. From your computer’s desktop, click
Start
>
All Programs
>
ASUS Utility
>
DSL-N55U ADSL
router
>
Firmware Restoration
.
IMPORTANT:
Launch the rescue mode before using the
Firmware Restoration utility.
Page 47 / 69
47
NOTE
:
This is not a firmware upgrade utility and cannot
be used on a working ASUS ADSL router. Normal firmware
upgrades must be done through the web interface. Refer to
Chapter 3: Configuring via the web GUI
for more details.
5. Specify a firmware file, then click
Upload
.
ADSL Setting Wizard
ADSL Setting Wizard helps you to set up your ADSL settings and
establish a secure wireless network.
To use the ADSL Setup Wizard:
1. From your computer’s desktop, click
Start
>
All Programs
>
ASUS Utility
>
DSL-N55U ADSL
router
>
ADSL Setting Wizard
.
2. Follow the onscreen instructions to set up your hardware.
When done, click
Next
.
Page 48 / 69
48
3. Key in the ADSL router’s default user name
admin
and
password
admin
, then click
Next
.
4.
Wait for a few minutes until your ADSL router finishes detecting
your Internet connection type.
Page 49 / 69
49
5.
Key in the user name and password for your Internet
connection type. Click
Apply
.
NOTES:
• The PPPoE Internet connection type is used in this setup case.
The setup screen varies with different Internet connection
types.
• Obtain the required information such as the user name and
password from your Internet Service Provider (ISP).
If the QIS cannot detect your Internet connection type, click
Manual Setting
and set up the Internet connection manually.
Page 50 / 69
50
6. The Internet connection setup is completed.
•
Click
Going to Internet
to surf the Internet.
•
Click
Simple Wireless Security Setup
to configure the basic
security settings including the SSID, authentication, and
encryption methods for the ADSL router. (Recommended)
•
Click
Back to main page page
to go back to the main page
of the web GUI.
19216811.live