1. Home
    2. /
  2. Manuals
    3. /
  3. ASUS
    4. /
  4. DSL-N13
    5. /
  5. 6
Page 26 / 54 Scroll up to view Page 21 - 25
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
24
802.1X
1. Click
Wireless -> Security
in the left side menu to open the configuration page.
2. Select
802.1X
in the
Network Authentication
field to enable authentication using
RADIUS server in your network.
3. Input the
RADIUS Server IP address
,
RADIUS port
(the default value is 1812), and
RADIUS Key.
4.
You can choose to enable or disable data encryption. If you want to encrypt data,
select
Enable
in the
WEP Encryption field
, select 64-bit or 128-bit
Encryption
Strength
for key length. Click
Set Encryptioin Keys
button to setup the keys.
5. Refer to
Open
mode Step 4 for key configuration.
6. Press
Save/Apply
to save and activate the settings.
WPA
1. Click
Wireless -> Security
in the left side menu to open the configuration page.
2. Select
WPA
in the
Network Authentication
field to enable RADIUS server
authentication and advanced encryption methods.
Page 27 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
25
3. Set the
WPA2 Preauthentication
to
Enabled
if you want to use this function.
4. The
Network Re-auth Interval
is 36000 seconds by default, you can setup this
value according to your network environment.
5.
Set up RADIUS server inforamtion by inputting WPA Group Rekey Interval,
RADIUS server IP address, RADIUS port and RADIUS Key.
6.
Set up WPA encryption methods. If there are only WPA2 clients within your network,
select AES, if WPA clients only, select TKIP; if both exist, select TKIP+AES.
7.
You can also enable WEP client to access your wireless network. To enable WEP
clients, set
WEP Encryption
to
Enabled
. Select 64-bit or 128-bit
Encryption
Strength
for key length then click
Set Encryptioin Keys
button to setup the keys.
Refer to
Open
mode Step 4 for key configuration.
8. Press
Save/Apply
to save and activate the settings.
WPA-PSK
1. Click
Wireless -> Security
in the left side menu to open the configuration page.
2. Select
WPA-PSK
in the
Network Authentication
field.
3.
Input the WPA Pre-Shared Key. The key is masked by system. To check the key,
press
Save/Apply
and wait until the page refreshes. Then click
Click here to
display
link, you can see the key displayed in a seperate window.
4.
Setup the WPA Group Rekey Interval.
5.
Set up WPA encryption methods. If there are only WPA2 clients within your network,
select AES, if WPA clients only, select TKIP; if both exist, select TKIP+AES.
6.
You can also enable WEP client to access your wireless network. To enable WEP
clients, set
WEP Encryption
to
Enabled
. Select 64-bit or 128-bit
Encryption
Strength
for key length then click
Set Encryption Keys
button to setup the keys.
Refer to
Open
mode Step 4 for key configuration.
7. Press
Save/Apply
to save and activate the settings.
Page 28 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
26
MAC filter
You can setup MAC filters to allow or deny wireless clients with known MAC addresses.
To setup MAC filter:
1. Click
Wireless -> MAC Filter
in the left side menu to open the configuration page.
2.
Select the restriction mode for the filter: select
Allow
to allow the client and deny
the rest; select
Deny
to deny the client and allow the rest. By default, the filter is set
to
Disable
which allows all clients. Click
Add
to create a filter.
2.
Type the MAC address of the wireless client you want to allow or block.
3. Press
Save/Apply
to save and activate the settings.
Wireless bridge
You can connect DSL-N13 to other wireless bridges so as to expand your wireless LAN.
This function is also refer to as Wireless Distribution System (WDS).
To setup WDS, the wireless routers must meet the following requirements:
1.
Using the same encryption.
2.
Working on the same channel.
3.
The IP addresses of all wireless bridges are within the same subnet.
4. WDS enabled.
5.
For bridging wireless routers, the MAC Addresses of the uplink wireless router must
be saved to the
Remote Bridge List
. For uplink wireless router, MAC addresses of
all bridging router must be saved.
Example:
DSL-N13 (wireless bridge with Internet access), WL-500gP (wireless bridge),
and WL-500gD (wireless bridge). Refer to the illustration on the next page.
DSL-N13
WL-500gD
WL-500gP
SSID
ASUS
ASUS
ASUS
DHCP server
Enabled
Disabled
Disabled
LAN IP address
192.168.1.1
192.168.1.2
192.168.1.3
Authentication
Open
Open
Open
Encryption
WEP-128bit
WEP-128bit
WEP-128bit
Remote bridge
00:01:00:01:01:02
00:01:00:01:01:03
00:01:00:01:01:01
00:01:00:01:01:01
MAC address
00:01:00:01:01:01
00:01:00:01:01:02
00:01:00:01:01:03
Channel
11
11
11
Page 29 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
27
WDS setup (DSL-N13)
1.
Setting up encryption
If you want to use encryption function, select a
Network Authentication
mode; if not,
select
Disabled
. Click
Wireless -> Security
to open the configuration page.
In this example, set authentication to
Open
and encryption to
Enabled,
select
128bit
for
Encryption Strength, then click
Set Encryption Keys
.
Page 30 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
28
2.
Setting up channel
Click
Wireless -> Advanced
. Set
Channel
to
11
and click
Save/Apply
.
You can check
Enable ASUS PassPhrase
and input a string in
Passphrase
field to let
the system generate the Network Keys. You can also disable Passphrase and input four
keys manually. When finished, click
Save/Apply
.

Rate

4 / 5 based on 2 votes.

Popular ASUS Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top