Page 16 / 54
Scroll up to view Page 11 - 15
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
14
Wireless Setup
1.
Designate an SSID (network name) for DSL-N13. Choose the security level then
input a key. The number of digit of your key depends on the security level you
choose. Refer to the note on the web page. When finished, click
Next
.
2.
This page provides a summary of DSL-N13 WAN and wirelss configuration. Click
Save/Reboot
to save and activate your configuration.
3.
Setup complete! DSL-N13 reboots in about 50 seconds. The green bar shows the
current rebooting status. After reboot, the web page will automatically refresh to
display the settings.
Page 17 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
15
EZSetup
ASUS DSL-N13 Wireless ADSL2/2+ Modem Router provides an easy-to-use setup
utility -- EZSetup. With this utility, you can setup your Internet connection, wireless LAN
with just several clicks.
Installing ASUS utility
To use ASUS EZSetup for DSL-N13 configuration, you must install the ASUS utilities
from the support CD included in your package. Insert the CD into your optical drive and
autorun the installation program. If autorun is disabled on your computer, double-click
SETUP.EXE
in the root directory of the CD.
Setup DSL-N13 using EZSetup
1.
Before using this utility, make sure that your hardware connections are all set. Click
Start -> Program -> ASUS Utility -> DSL-N13 Wireless Router -> EZSetup
Wizard
to start EZSetup. Click
Next
.
2. Click
EZSetup
.
Page 18 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
16
EZSetup
3.
Push the red EZSetup button on the rear panel of DSL-N13 for over 3 seconds until
the PWR LED is blinking.
5.
The system generates the SSID and Network key automatically. The network key
is a 128-bit WEP key by default. You can accept the settings, or assign SSID and
keys to your own need. Click
Next
to save the wireless settings.
4. Click
EZSetup
button.
Page 19 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
17
6.
Next, EZSetup will guide you to complete the Internet connection settings. Check
Configure ISP settings
then click
Next
to continue.
7.
The system detects your Internet connection type. The progress may take several
seconds.
If your ADSL connection is successfully detected by DSL-N13, skip to Step
8. If your ADSL connection can not be detected, you need follow Step 8 and
manually set up your ADSL connection.
8.
Select your country and ISP then click
Next
.
Page 20 / 54
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
18
If your country or ISP are not on the list, select
Not listed
for both country and
ISP fields. Then select
Connection type
and fill in VPI and VCI. You can get
VPI/VCI values from your ISP.
9.
Input your ISP account User name and Password then click
Next
.
10. Setup complete! This page shows the wireless network setting parameters. You can
either save it or print it out for future reference. Click
Finish
to quit EZSetup.
19216811.live