Page 16 / 50
Scroll up to view Page 11 - 15
Ambit Broadband
Users Guide
16
Installing the Software Drivers in Windows Me Operating System
To install the cable modem software drivers using the Windows Me operating system:
1. Power on your PC. After your computer boots, Windows detects the cable modem. The Found New
Hardware screen appears, followed by the Found New Hardware Wizard screen.
2. Insert the CD into the PC
’
s CD-ROM and click
Next.
You will see the following screen.
3. Select
Automatic search for a better driver (Recommended)
and click
(Next).
The computer
automatically copies the necessary driver files from the CD. You will see the following screen.
4. Check the
CD-ROM drive
check box and verify that the CD is in the CD-ROM drive. Click
Next
Page 17 / 50
Ambit Broadband
Users Guide
17
to have Windows search for the necessary driver files. You will see the following
5. Click
Finish
after the computer has copied the necessary files.
6. Click
Yes
to restart the computer
Installing the Software Drivers in Windows 2000 Operating System
To install the cable modem software drivers using the Windows 2000 operating system:
1. Power on your PC. After your computer boots, Windows detects the cable modem. The Found
New Hardware screen appears, followed by the Found New Hardware Wizard screen.
2. Insert the CD into the PC
’
s CD-ROM Drive and click
Next.
You will see the following screen.
Page 18 / 50
Ambit Broadband
Users Guide
18
3. Select
Search for a suitable driver for my device (recommended.
Then select
Next>.
You will see the
following screen
4. Check the
CD-ROM drive
check box and verify that the CD is in the CD-ROM drive.
5. Click
Next
to have Windows locate the necessary driver files. You will see the following screen.
Page 19 / 50
Ambit Broadband
Users Guide
19
6. Click
Next
to install the driver files for the cable modem. You will see the following screen.
7.
Click
Finish
to complete the installation.
8.
After the installation is completed, verify that the USB LED is lit on the front of you cable modem.
If not, refer to the troubleshooting section later in this chapter.
Installing the Software Drivers in Windows XP Operating System
1. Power on your PC. After your computer boots, Windows detects the cable modem. The Found
New Hardware screen appears, followed by the Found New Hardware Wizard screen.
Page 20 / 50
Ambit Broadband
Users Guide
20
2. Choose
the software automatically (Recommended).
Click
Next
to continue. You will see the
following screen.
3. Click
Finish
to complete the installation.
Troubleshooting the USB Installation
1. None of the LEDs are on when I power on the Wireless LAN Cable Modem.
Answer: Check the connection between the power adapter and the cable modem. Power off the
Wireless LAN Cable Modem and wait for 5 Seconds and power on the modem again. If the problem
still exists, you may have a hardware problem.
2. When attempting to install the USB driver in Windows 98 SE, I receive the following error message:
Device not installed at this time. Driver not found.
Answer: This usually occurs when the wrong driver has been installed. To remove the wrong driver
19216811.live