1. Home
    2. /
  2. Manuals
    3. /
  3. Allied-Telesis
    4. /
  4. AT-iMG624A
    5. /
  5. 172
Page 856 / 998 Scroll up to view Page 851 - 855
PPPoE
PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-86
Example
--> pppoe set transport pppoe1 headers llc enabled
See also
PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.22 PPPOE SET TRANSPORT HEADERS LLC_ROUTED
Syntax
PPPOE SET TRANSPORT
{<name>|<number>}
HEADERS LLC_ROUTED
{ENABLED|DISABLED}
Description
This command allows you to enable/disable whether your system can transmit and
receive packets containing
llc_routed packets
. If you want LLC_bridged packets to be
transmitted and received instead of llc_routed packets, use the
PPPOE SET TRANS-
PORT HEADERS LLC ENABLED
command.
When
llc_routed headers
are disabled, the default encapsulation method is
llc_bridged
.
PPP determines which format to use to transmit/receive packets by ‘learning’ the format
information from incoming packet headers.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Description
Default Value
name
An existing PPPoE transport. To display transport names, use
the
PPPOE LIST TRANSPORTS
command.
N/A
number
An existing PPPoE transport. To display transport numbers,
use the
PPPOE LIST TRANSPORTS
command.
N/A
enabled
Packets that have LLC headers can be transmitted/received.
enabled
disabled
Packets that have LLC headers can not be transmitted/
received.
Option
Description
Default Value
name
An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS
com-
mand.
N/A
Page 857 / 998
PPPoE command reference
PPPoE
8-87
iMG/RG Software Reference Manual (ADSL Port)
Example
--> pppoe set transport pppoe1 headers llc_routed enabled
See also
PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.23 PPPOE SET TRANSPORT HEADERS VCMUX_BRIDGED
Example
PPPOE SET TRANSPORT
{<name>|<number>}
HEADERS VCMUX_BRIDGED
{ENABLED|DISABLED}
Description
This command allows you to enable/disable whether your system can transmit and
receive packets containing
vcmux_bridged packets
. If you want vcmux_routed packets to
be transmitted and received instead of vcmux_bridged packets, use the
PPPOE SET
TRANSPORT HEADERS VCMUX_ROUTED
command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> pppoe set transport pppoe1 headers vcmux_bridged enabled
number
An existing PPPoE transport. To display transport num-
bers, use
THE PPPOE LIST TRANSPORTS
com-
mand.
N/A
enabled
The encapsulation method to be used is llc_routed
Disabled
disabled
Packets that have llc_routed headers cannot be trans-
mitted/received.
Option
Description
Default Value
name
An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS
command.
N/A
number
An existing PPPoE transport. To display transport num-
bers, use
THE PPPOE LIST TRANSPORTS
com-
mand.
N/A
enabled
The encapsulation method to be used is Vcmux Bridged
Disabled
disabled
Packets that have vcmux_bridged headers cannot be trans-
mitted/received.
Page 858 / 998
PPPoE
PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-88
See also
PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.24 PPPOE SET TRANSPORT HEADERS VCMUX_ROUTED
Syntax
PPPOE SET TRANSPORT
{<name>|<number>}
HEADERS VCMUX_BRIDGED
{ENABLED|DISABLED}
Description
This command allows you to enable/disable whether your system can transmit and
receive packets containing
vcmux_routed packets
. If you want vcmux_bridged packets to
be transmitted and received instead of vcmux_routed packets, use the
PPPOE SET
TRANSPORT HEADERS VCMUX_BRIDGED
command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> pppoe set transport pppoe1 headers vcmux_bridged enabled
See also
PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.25 PPPOE SET TRANSPORT IDLETIME LANTRAFFICONLY
Syntax
PPPOE SET TRANSPORT
{<name>|<number>}
IDLETIME LANTRAFFICONLY
{ENABLED|DISABLED}
Description
This command allows you to specify that the value of ideltime which has been set, to be
valid when there is no IP activity on the lan side. With the ideltime lantrafficonly set as
disabled, the value of ideltime takes into account the IP traffic from the wan side also.
However when set as enabled, it takes only the lan side IP traffic into account.
Option
Description
Default Value
name
An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS
command.
N/A
number
An existing PPPoE transport. To display transport numbers,
use
THE PPPOE LIST TRANSPORTS
command.
N/A
enabled
The encapsulation method to be used is Vcmux Routed
Disabled
disabled
Packets that have vcmux_routed headers cannot be trans-
mitted/received.
Page 859 / 998
PPPoE command reference
PPPoE
8-89
iMG/RG Software Reference Manual (ADSL Port)
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> pppoe set transport pppoe1 idletime lantrafficonly
enabled
See also
PPPOE LIST TRANSPORTS
PPOE SET TRANSPORT LCPECHOEVERY
8.7.4.1.26 PPPOE SET TRANSPORT IDLETIMEOUT
Syntax
PPPOE SET TRANSPORT
{<name>|<number>}
IDLETIMEOUT
<idletime-
out>
Description
This command allows you to set a ‘idle’ time out for your LAN connection. If you are
connected to an ISP via PPPoE but fail to send a request for data within a specified time
limit, the PPPoE session is disabled.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Description
Default Value
name
An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS
command.
N/A
number
An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS
com-
mand.
N/A
enabled
Enable the ideltimeout for LAN traffic only
Disabled
disabled
Include WAN traffic for the idletimeout interval.
Option
Description
Default Value
name
An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS
command.
N/A
number
An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS
com-
mand.
N/A
Page 860 / 998
PPPoE
PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-90
Example
--> pppoe set transport pppoe1 idletimeout 20
See also
PPPOE LIST TRANSPORTS
PPOE SET TRANSPORT LCPECHOEVERY
8.7.4.1.27 PPPOE SET TRANSPORT INTERFACE
Syntax
PPPOE SET TRANSPORT {<name>|<number>} INTERFACE <interface>
Description
This command sets the PPP interface for an existing PPPoE transport.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> pppoe set transport pppoe2 interface 4
See also
PPPOE SHOW TRANSPORT
PPPOE LIST TRANSPORTS
8.7.4.1.28 PPPOE SET TRANSPORT LCPECHOEVERY
Syntax
PPPOE SET TRANSPORT
{<name>|<number>}
LCPECHOEVERY
<interval>
Description
This command tells a specified PPP transport to send an LCP (
Link Control Protocol
) echo
request frame at specified intervals (in seconds). If no reply to the request is received,
the PPP connection is torn down. This functionality is also known as ‘keep-alive’.
If you do not want to send LCP echo frames, specify zero (0) in the <interval> attribute.
idletimeout
The length of time (in minutes) that a PPPoE session con-
nected to an ISP can remain idle before the session is dis-
abled. The time can be any value between 0 and 60. A
value of 0 means that no idletimeout is set.
0
Option
Description
Default Value
name
An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS
command.
N/A
number
An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS
com-
mand.
N/A
interface
The PPP interface to a channel that transports PPPoE data.
Multiple channels can use a single interface. The interface
value can be any positive integer.
N/A

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top