1. Home
    2. /
  2. Manuals
    3. /
  3. Allied-Telesis
    4. /
  4. AT-iMG624A
    5. /
  5. 138
Page 686 / 998 Scroll up to view Page 681 - 685
Common VoIP attributes: QoS, Media and DTMF-Relay
VOIP QOS command reference
iMG/RG Software Reference Manual (Voice Service)
6-122
6.4.5
VOIP QOS command reference
This section describes the commands available on iMG/RG/iBG to configure and manage the VoIP QoS
attributes.
6.4.5.1 VoIP QoS CLI commands
The table below lists the
voip qos
commands provided by the CLI:
6.4.5.1.1 VOIP QOS SET DSCP
Syntax
VOIP QOS SET {DSCP <dscp-code> | NONE}
Description
This command sets the value of the
dsc
p field in the IP header for both VoIP signaling and
media (RTP) originated packets.
TABLE 6-15
Functional Mapping for Common VoIP attributes
Functions
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
VOIP QOS CLI COMMANDS
X
X
X
X
X
X
X
X
X
VOIP MEDIA CLI COMMANDS
X
X
X
X
X
X
X
X
X
VOIP DTMF-RELAY CLI COMMANDS
X
X
X
X
X
X
X
X
X
TABLE 6-16
VoIP QoS
commands
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
VOIP QOS SET DSCP
X
X
X
X
X
X
X
X
X
VOIP QOS SET DSCP SIGNALING-PROTOCOL
X
X
X
X
X
X
X
X
X
VOIP QOS SET DSCP MEDIA-PROTOCOL
X
X
X
X
X
X
X
X
X
VOIP QOS SET TOS
X
X
X
X
X
X
X
X
X
VOIP QOS SET TOS SIGNALING-PROTOCOL
X
X
X
X
X
X
X
X
X
VOIP QOS SET TOS MEDIA-PROTOCOL
X
X
X
X
X
X
X
X
X
VOIP QOS SHOW
X
X
X
X
X
X
X
X
X
Page 687 / 998
VOIP QOS command reference
Common VoIP attributes: QoS, Media and DTMF-Relay
6-123
iMG/RG Software Reference Manual (Voice Service)
Note:
To disable DSCP support (i.e. remove any previous configuration performed on DSCP field on signalling
and speech packets) use the VOIP QOS SET NONE command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip qos set dscp 24
See also
VOIP QOS SHOW
6.4.5.1.2 VOIP QOS SET DSCP SIGNALING-PROTOCOL
Syntax
VOIP QOS SET {DSCP <dscp-code> | NONE} SIGNALING-PROTOCOL
Description
This command sets the value of the
dsc
p field in the IP header only for VoIP signaling orig-
inated packets.
Note:
To disable DSCP support (i.e. remove any previous configuration performed on DSCP field on signalling
and speech packets) use the VOIP QOS SET NONE SIGNALING-PROTOCOL command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip qos set dscp 34 signaling-protocol
See also
VOIP QOS SET DSCP
VOIP QOS SHOW
6.4.5.1.3 VOIP QOS SET DSCP MEDIA-PROTOCOL
Syntax
VOIP QOS SET {DSCP <dscp-code> | NONE} MEDIA-PROTOCOL
Option
Description
Default Value
dscp-code
The value of
dscp
field. Acceptable value are
from 0 to 63
none
Option
Description
Default Value
dscp-code
The value of
dscp
field. Acceptable value are
from 0 to 63
none
Page 688 / 998
Common VoIP attributes: QoS, Media and DTMF-Relay
VOIP QOS command reference
iMG/RG Software Reference Manual (Voice Service)
6-124
Description
This command sets the value of the
dsc
p field in the IP header only for VoIP media (RTP)
originated packets.
Note:
To disable DSCP support (i.e. remove any previous configuration performed on DSCP field on signalling
and speech packets) use the VOIP QOS SET NONE MEDIA-PROTOCOL command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip qos set dscp 63 media-protocol
See also
VOIP QOS SET DSCP
VOIP QOS SHOW
6.4.5.1.4 VOIP QOS SET TOS
Syntax
VOIP QOS SET {TOS <tos-code> | NONE}
Description
This command sets the value of the
tos
field in the IP header for both VoIP signaling and
media (RTP) originated packets.
Note:
To disable TOS support (i.e. remove any previous configuration performed on TOS field on signalling
and speech packets) use the VOIP QOS SET NONE command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip qos set tos 4
See also
VOIP QOS SHOW
6.4.5.1.5 VOIP QOS SET TOS SIGNALING-PROTOCOL
Syntax
VOIP QOS SET {TOS <tos-code> | NONE} SIGNALING-PROTOCOL
Option
Description
Default Value
dscp-code
The value of
dscp
field. Acceptable value are
from 0 to 63
none
Option
Description
Default Value
tos-code
The value of
tos
field. Acceptable value are in
the range 0 to 7
none
Page 689 / 998
VOIP QOS command reference
Common VoIP attributes: QoS, Media and DTMF-Relay
6-125
iMG/RG Software Reference Manual (Voice Service)
Description
This command sets the value of the
tos
field in the IP header only for VoIP signaling origi-
nated packets.
Note:
To disable TOS support (i.e. remove any previous configuration performed on TOS field on signalling and
speech packets) use the VOIP QOS SET NONE SIGNALING-PROTOCOL command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip qos set tos 4 signaling-protocol
See also
VOIP QOS SET TOS
VOIP QOS SHOW
6.4.5.1.6 VOIP QOS SET TOS MEDIA-PROTOCOL
Syntax
VOIP QOS SET {TOS <tos-code> | NONE} MEDIA-PROTOCOL
Description
This command sets the value of the
tos
field in the IP header only for VoIP media (RTP)
originated packets.
Note:
To disable TOS support (i.e. remove any previous configuration performed on TOS field on signalling and
speech packets) use the VOIP QOS SET NONE MEDIA-PROTOCOL command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> voip qos set tos 7 media-protocol
See also
VOIP QOS SET TOS
VOIP QOS SHOW
Option
Description
Default Value
tos-code
The value of
tos
field. Acceptable value are in the range 0
to 7
none
Option
Description
Default Value
tos-code
The value of
tos
field. Acceptable value are in the range 0
to 7
none
Page 690 / 998
Common VoIP attributes: QoS, Media and DTMF-Relay
VoIP Media command reference
iMG/RG Software Reference Manual (Voice Service)
6-126
6.4.5.1.7 VOIP QOS SHOW
Syntax
VOIP QOS SHOW
Description
This command shows the value of DSCP or TOS fields used in the IP header of RTP
voice packets.
Example
--> voip qos show
Gateway Quality of Service:
------------------------------------------------------------------
QoS media:
63 (DSCP)
Qos signaling:
34 (DSCP)
Example
--> voip qos show
Gateway Quality of Service:
------------------------------------------------------------------
QoS media:
7 (TOS)
Qos signaling:
4 (TOS)
6.4.6
VoIP Media command reference
This section describes the commands available on iMG/RG/iBG to configure and manage the VoIP Media
attributes.
6.4.6.1 VoIP Media CLI commands
The table below lists the
VOIP Media
commands provided by the CLI:
TABLE 6-17
VoIP Media
commands
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
VOIP MEDIA SET PACKETLENGTH
X
X
X
X
X
X
X
X
X
VOIP MEDIA SET PORTRANGE
X
X
X
X
X
X
X
X
X
VOIP MEDIA SET RTCP
X
X
X
X
X
X
X
X
X
VOIP MEDIA SET SESSIONTIMEOUT
X
X
X
X
X
X
X
X
X
VOIP MEDIA SHOW
X
X
X
X
X
X
X
X
X

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top