Allied-Data CopperJet-1616-2P Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Allied-Data CopperJet-1616-2P router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 86
Installation Manual
CopperJet 16xx series
Based on firmware 6.10
June 2006
Page 2 / 86
Document History
Date
Version
Status
Description
02 June 2006
1.0
Final
Updated to firmware 6.10
Page 3 / 86
Product DISCLAIMER
This manual by ALLIED DATA TECHNOLOGIES B.V. (hereafter referred to as ALLIED DATA
TECHNOLOGIES) is a reflection of the current state of the products described in it.
It has been our goal to provide a manual that is complete and clear to ensure that our
products are as easy to use. However, this manual may contain technical inaccuracies and
typing errors. As a result of rapid developments, we are also obliged to reserve the right to
implement technical modifications and developments without prior notice. For this reason,
ALLIED DATA TECHNOLOGIES does not guarantee the contents of the manual and its
permanent applicability.
Neither is ALLIED DATA TECHNOLOGIES liable for possible loss of information or any
improper use of information resulting from the consultation of this manual. In particular,
ALLIED DATA TECHNOLOGIES is not liable for any direct or indirect damage (including loss
of profits and comparable losses) resulting from the use or improper use of this manual,
even if ALLIED DATA TECHNOLOGIES or a representative of ALLIED DATA TECHNOLOGIES
has been informed that such damage could arise. Of course, this does not detract us from
our legal liability for intentionally inflicted damage or damage on the basis of gross
negligence.
In relation to the information mentioned in this manual, ALLIED DATA TECHNOLOGIES
does not guarantee that there are no industrial rights of ownership (trademarks, patents,
etc.). This also applies to commonly used brand names, company names and product
names, but these are subject to the relevant trademark, patent and registered design
laws.
The information is not to be copied, translated, reproduced or transferred or stored on any
electronic medium or other machine, neither wholly nor partly, without prior permission in
writing from ALLIED DATA TECHNOLOGIES.
The sale and use of software is subject to the ALLIED DATA TECHNOLOGIES General
Terms of Delivery and Payment as well as its License Terms.
Should any term regarding the disclaimer be or become void for legal reasons, this will not
affect the other terms.
Page 1
Page 4 / 86
Contents
1
Packaging contents
...........................................................................................
4
2
LED Indicators and back panel
............................................................................
5
2.1
CopperJet 16xx series LED indicators
...........................................................
5
2.2
CopperJet 16xx series back panel
................................................................
6
3
Connecting the CopperJet
..................................................................................
7
3.1
Connecting the CopperJet 16xx series
..........................................................
7
3.2
Connecting the CopperJet 1616/1626 with Active inbound Call Switching (ACS).8
4
Before you start
................................................................................................
9
4.1
IP Address Settings
...................................................................................
9
4.2
Name Server Information
...........................................................................
9
4.3
ATM Settings
............................................................................................
9
4.4
PPP Settings
............................................................................................
9
4.5
VoATM settings
........................................................................................
9
4.6
VoIP settings
..........................................................................................
10
5
Configuring the CopperJet
................................................................................
11
5.1
Accessing the build-in WebServer
..............................................................
11
5.2
Quickstart
..............................................................................................
12
5.3
System
.................................................................................................
13
5.3.1
Device Info
.........................................................................................
13
5.3.2
Event Log
...........................................................................................
13
5.3.3
Log out
...............................................................................................
14
5.3.4
Remote Access
....................................................................................
14
5.3.5
Update Firmware and Restore Configuration Profile
...................................
15
5.3.6
Backup Configuration Profile
..................................................................
16
5.3.7
Restart Device
.....................................................................................
16
5.4
Configuration
.........................................................................................
17
5.4.1
Save Config
........................................................................................
17
5.4.2
Changing the login settings
...................................................................
17
5.5
LAN Connections
.....................................................................................
19
5.5.1
Edit a LAN connection
...........................................................................
19
5.5.1.1
Virtual Interface
.............................................................................
20
5.6
WAN Connections
...................................................................................
21
5.6.1
Configuring RFC1483 Bridged service attached to the Bridge
......................
22
5.6.1.1
Configuring DHCP on your network card
.............................................
23
5.6.2
Configuring RFC1483 Routed service attached to the Router
.......................
24
5.6.3
Configuring RFC1483 Bridged service attached to the Router
......................
25
5.6.4
Configuring IPoA routed service attached to the Router
.............................
26
5.6.5
Configuring PPPoA routed service attached to the Router
...........................
27
5.6.6
Configuring PPPoE routed service attached to the Router
...........................
29
5.7
Security
................................................................................................
31
5.7.1
Enabling Security
.................................................................................
31
5.7.2
Configuring Security Interfaces
..............................................................
32
5.7.3
Configuring Network Address Translation (NAT)
........................................
33
5.7.3.1
Configuring NAT global addresses
.....................................................
34
5.7.3.2
Configuring NAT reserved mapping
....................................................
34
5.7.4
Enabling Firewall
..................................................................................
36
5.7.5
Enabling Intrusion Detection
..................................................................
36
5.7.6
Set a Security level
..............................................................................
36
5.7.7
Configuring portfilters
...........................................................................
36
5.7.8
Configuring validators
...........................................................................
38
5.7.8.1
Configuring Triggers
........................................................................
39
5.7.8.2
Adding Triggers
..............................................................................
39
5.7.8.3
Deleting Triggers
............................................................................
40
5.8
Search Service
.......................................................................................
41
5.9
Zero Installation PPP Bridge (ZIPB)
...........................................................
42
5.9.1
ZIPB in bridged configurations
...............................................................
42
5.9.2
ZIPB in routed configurations
.................................................................
42
5.9.3
Enabling/Disabling ZIPB
........................................................................
42
5.9.4
ZIPB Advanced configuration
.................................................................
44
5.9.5
Limitations of ZIPB
...............................................................................
45
5.10
IP Routes
..............................................................................................
46
Page 2
Page 5 / 86
5.10.1
Creating an IP V4 Route
.....................................................................
46
5.11
DHCP Server
..........................................................................................
47
5.11.1
Configuring DHCP Server
....................................................................
47
5.11.2
Creating a fixed host
..........................................................................
49
5.11.3
Disabling DHCP Server
.......................................................................
50
5.12
Configuring DHCP Relay
...........................................................................
51
5.12.1
Enabling/disabling DHCP relay
.............................................................
51
5.12.2
Configuring DHCP relay on specific interfaces
........................................
51
5.12.3
Adding a DHCP server to the DHCP relay list
.........................................
52
5.12.4
Editing/deleting entries in the DHCP relay list
........................................
52
5.13
Configuring DNS client
.............................................................................
52
5.13.1
Configuring DNS servers
....................................................................
52
5.13.2
Configuring DNS search domains
.........................................................
52
5.14
Configuring DNS Relay
............................................................................
52
5.14.1
Configuring DNS Relay manually
..........................................................
53
5.14.2
Automatically discover DNS Relay addresses
.........................................
53
5.14.3
Configuring DNS relay LAN database
....................................................
55
5.15
Configuring Dynamic DNS Client (DynDNS Client)
........................................
56
5.16
Configuring Simple Network Time Protocol (SNTP) Client
..............................
58
5.17
Configuring Voice over DSL
......................................................................
60
5.17.1
Basic VoDSL Settings
.........................................................................
60
5.17.2
Advanced Voice over DSL Configuration
................................................
61
5.17.2.1
Flash on hook timing
.....................................................................
61
5.17.2.2
Initial ring timing for CLIP
..............................................................
62
5.17.2.3
Network Time Reference Clock
........................................................
62
5.17.2.4
Ring cadence configuration support
.................................................
62
5.17.2.5
Define Cadences
...........................................................................
63
5.17.2.6
Echo Cancellation
..........................................................................
63
5.18
Configuring VoIP
.....................................................................................
64
5.18.1
Configuring VoIP using SIP
.................................................................
65
5.18.1.1
Configuring Signalling DSCP and RTP DSCP
.......................................
66
5.18.1.2
Advanced SIP Configuration
...........................................................
68
5.18.1.3
Configuring Silence Suppression
......................................................
68
5.18.1.4
Configuring Digitmap
.....................................................................
68
5.18.1.5
Configuring Echo Cancellation
.........................................................
69
5.18.1.6
Configuring Packetperiod
...............................................................
69
5.18.1.7
Configuring Proxyroute
..................................................................
69
5.18.1.8
Configuring Registration Expires
......................................................
70
5.18.1.9
Configuring Registration port
..........................................................
70
5.18.1.10
Configuring Outboundserver
.........................................................
70
5.18.1.11
Configuring Outboundserverport
....................................................
70
5.18.1.12
Configuring Outboundservertransport
.............................................
70
5.18.1.13
Enable SIP tracing in the CopperJet
...............................................
71
5.18.2
Configuring VoIP using MGCP
..............................................................
72
5.18.2.1
Configuring Call agents
..................................................................
73
5.18.2.2
Advanced MGCP Configuration
........................................................
73
5.18.2.3
Configuring MGCP Domain
..............................................................
74
5.18.2.4
Configuring MGCP eptypename
.......................................................
74
5.19
DSL Line
................................................................................................
75
6
WAN Configuration Examples
............................................................................
77
6.1
Configuring a Bridged connection
..............................................................
77
6.2
Configuring a Routed connection on a bridged line with NAT
..........................
77
6.3
Configuring a PPPoA connection with NAT
...................................................
78
6.4
Configuring a PPPoE connection with NAT
...................................................
78
7
Glossary
........................................................................................................
79
Page 3

Rate

4.5 / 5 based on 2 votes.

Popular Allied-Data Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top