1. Home
    2. /
  2. Manuals
    3. /
  3. A-Link
    4. /
  4. WNAP4G
    5. /
  5. 8
Page 36 / 111 Scroll up to view Page 31 - 35
A-LINK WNAP4G
User Manual
36
At Combo WAN setting page, you can choose Disable, Load Sharing, or
Failover options.
This Combo WAN feature will be deactivated if you select “Disable” from the
list.
A. Load Sharing
The feature of Load Sharing will activate 3G WAN and Ethernet WAN
simultaneously.
a.
Combo WAN Mode:
Choose Load Sharing mode.
b.
Remote Host for Keep Alive:
Type an IP address or domain name of
remote host to detect if Internet connection is alive.
c.
Primary WAN:
The primary WAN is the WAN type you set at Internet Setup
page.
d.
Secondary WAN:
Press “New Add” button to add the secondary WAN. If
the primary WAN is 3G or iBurst, then you can choose one of Static IP,
Dynamic IP, and PPPoE as the secondary WAN. However, 3G can be the
Page 37 / 111
A-LINK WNAP4G
User Manual
37
secondary WAN if primary WAN is Static IP, Dynamic IP, or PPPoE.
B. Failover
With this function enabled, when the primary WAN connection is broken, the
device will automatically switch to secondary WAN connection and keep you
connected to Internet. Meanwhile, if the device detects that the primary WAN
connection is recovered, your Internet connection will be switched from
secondary WAN back to primary WAN.
a.
Combo WAN Mode:
Choose Failover mode.
b.
Remote Host for Keep Alive:
Type an IP address or domain name of
remote host to detect if Internet connection is alive.
c.
Primary WAN:
The primary WAN is the WAN type you set at Internet Setup
page.
d.
Secondary WAN:
Press “New Add” button to add the secondary WAN. If
Page 38 / 111
A-LINK WNAP4G
User Manual
38
the primary WAN is 3G or iBurst, then you can choose one of Static IP,
Dynamic IP, and PPPoE as the secondary WAN. However, 3G can be the
secondary WAN if primary WAN is Static IP, Dynamic IP, or PPPoE.
3.1.2 IPv6
The growth of the Internet has created a need for more addresses than are possible
with IPv4.
IPv6
(
Internet Protocol version 6
) is a version of the Internet Protocol
(IP) intended to succeed IPv4, which is the protocol currently used to direct almost
all Internet traffic. IPv6 also implements additional features not present in IPv4. It
simplifies aspects of address assignment (stateless address auto-configuration),
network renumbering and router announcements when changing Internet
connectivity providers. This router supports 6 types of IPv6 connection (Static IPv6/
DHCPv6/PPPoE/6 to 4/IPv6 in IPv4 tunnel/6RD).
Please ask your ISP of what
types of IPv6 are supported before you proceed with IPv6 setup.
Page 39 / 111
A-LINK WNAP4G
User Manual
39
3.1.2.1
Static IPv6
1.
IPv6
: Disable or enable the IPv6 functions.
2.
IPv6 Connection
: you can choose Static IPv6 from the list.
3.
WAN IPv6 address settings
: you can add IPv6 address / subnet prefix
length / default Gateway / Primary DNS address and secondary DNS address.
4.
LAN IPv6 address settings
: you can add LAN IPv6 address, and IPv6
Link-Local address will be showed automatically.
5.
Address auto configuration setting:
Disable or enable this auto
configuration setting. You may set stateless or stateful( Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
3.1.2.2
DHCPv6
1.
IPv6 DNS settings:
You may obtain IPv6 DNS automatically or set DNS
address manually for Primary DNS address and secondary DNS address.
2.
LAN IPv6 address settings:
You can add LAN IPv6 address, and IPv6
Link-Local address will be showed automatically.
3.
Address auto configuration setting:
Disable or enable this auto
configuration setting. You may set stateless or stateful( Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
Page 40 / 111
A-LINK WNAP4G
User Manual
40
3.1.2.3
PPPoE
1.
PPPoE settings:
You need to type username and password of PPPoE
connection. The service name is only required when ISP asks you to input it.
MTU is 1492 by default.
2.
LAN IPv6 address settings:
You can add LAN IPv6 address, and IPv6
Link-Local address will be showed automatically.
3.
Address auto configuration setting:
Disable or enable this auto
configuration setting. You may set stateless or stateful( Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
3.1.2.4
When “
6 to 4
” is selected
, you need to do the following settings.
1.
6 to 4 Settings
: you may obtain IPv6 DNS automatically or set DNS

Rate

4 / 5 based on 3 votes.

Popular A-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top