Page 46 / 111
Scroll up to view Page 41 - 45
A-LINK WNAP4G
User Manual
46
E. WPA
Check Box was used to switch the function of the WPA. When the WPA function
is enabled, the Wireless user must
authenticate
to this router first to use the
Network service. RADIUS Server IP address or the 802.1X server’s domain
-
name.
Select Encryption and RADIUS Shared Key
If you select HEX, you have to fill in
64 hexadecimal (0, 1, 2…8, 9,
A, B…F) digits
If you select ASCII, the length of pre-share key is from 8 to 63.
Key value shared by the RADIUS server and this router. This key value is
consistent with the key value in the RADIUS server.
F. WPA-PKS2
WPA-PSK2 user AES and TKIP for Same the encryption, the others are same the
WPA-PSK.
G. WPA2
Another encryption options for WPA-PSK-TKIP and WPA-PSK2-AES, the others
are same the WPA-PSK.
H. W PA/WPA2
Another encryption options for WPA-TKIP and WPA2-AES, the others are same
the WPA.
By pressing
“WPS Setup”
, you can configure and enable the easy setup feature
WPS (Wi-Fi Protection Setup) for your wireless network.
Page 47 / 111
A-LINK WNAP4G
User Manual
47
1.
WPS:
You can enable this function by selecting “Enable”. WPS offers a safe and
easy way to allow the wireless clients connected to your wireless network.
2.
AP PIN
: You can press Generate New Pin to get an AP PIN.
3.
Config Mode
: Select your config Mode from “Registrar” or “Enrollee”.
4.
Config Status
: It shows the status of your configuration.
5.
Config Method
: You can select the Config Method here
from “Pin Code” or
“Push Button”.
6.
WPS status
: According to your setting, the status will show “Start Process” or
“No used”
By selecting
WDS Hybrid Mode
, you can connect this device to another AP via
WDS connection.
Page 48 / 111
A-LINK WNAP4G
User Manual
48
1.
Wireless Module:
You can enable this function by selecting
“
Enable
”
2.
Remote AP MAC 1~4:
Enter the MAC address for remote AP that you want to
connect via WDS.
3.
Encryption type:
Select the appropriate category. Once you set up that type of
encryption, second LAN PC must enter the same encryption type as the first one.
Press
“Wireless Clients List”
and the list of wireless clients will be shown
consequently.
Page 49 / 111
A-LINK WNAP4G
User Manual
49
3.1.4 Advanced Wireless Settings
Click on “Save” to store your settings or click “Undo” to give up the changes.
Page 50 / 111
A-LINK WNAP4G
User Manual
50
3.2 NAT
Virtual Server:
Allows others to access WWW.FTP. And other services on your
LAN.
Special Application:
This configuration allows some applications to connect
and work with the NAT router.
Loopback:
This option allows local hosts to access local virtual server via WAN
IP address of this router
DMZ:
Allows a computer to be exposed to unrestricted 2-way communication for
Internet games, Video conferencing, Internet telephony and other special
applications.
.
3.2.1 Virtual Server
This product’
s NAT firewall filters out unrecognized packets to protect your Intranet,
so all hosts behind this product are invisible to the outside world. If you wish, you
can make some of them accessible by enabling the Virtual Server Mapping.
19216811.live