Page 6 / 111
Scroll up to view Page 1 - 5
A-LINK WNAP4G
User Manual
6
1.2
Hardware Installation
A. Hardware configuration
Page 7 / 111
A-LINK WNAP4G
User Manual
7
B. LED indicators
LED
Indicator
Description
Status/USB
Green and Blink once
per second
No external USB device is attached,
and this router is working.
Green and Steady On
An external USB device is attached
Green and Blinking
Data packet transferred via attached
USB device (e.g. USB drive, 3G/4G
dongle)
Ethernet WAN
Green and Steady On
Ethernet WAN connection is
established
Green and Blinking
Data packet transferred via Ethernet
WAN
WLAN
Green and Blinking
Data packet transferred via WiFi
Green and Fast
Blinking
In WPS PBC mode
OFF
WiFi radio is disabled
Ethernet LAN 1~4
Green and Steady On
Ethernet LAN connection is
established
Green and Blinking
Data packet transferred via Ethernet
LAN
Page 8 / 111
A-LINK WNAP4G
User Manual
8
C. Installation Steps
Note:
DO NOT
connect the router
to power before performing the
installation steps below.
Step 1.
Plug a USB modem into USB port.
Step 2.
Insert RJ45 cable into LAN Port on the
back panel of the router. Then plug the
other end of into computer
.
Step 3.
Plug the power jack into the receptor on
the back panel of the router. Then plug
the other end into a wall outlet or power
strip.
Page 9 / 111
A-LINK WNAP4G
User Manual
9
Chapter 2 Getting Started with Easy Setup Utility
There are two approaches for you to set up the WNAP4G Router quickly and easily. One
is through executing the provided Windows Easy Setup Utility on your PC, and the other
is through browsing the device web pages and configuration.
2.1 Easy Setup by Windows Utility
Step 1
：
Install the Easy Setup
Utility from the provided
CD then follow the steps
to configure the device.
Step 2
：
Select Language then
click “Next” to continue.
Page 10 / 111
A-LINK WNAP4G
User Manual
10
Step 3
：
Then click the “Wizard”
to continue.
Step 4
：
Click “Next” to continue.
Step 5
：
Select Wireless Enable,
and then click “Next” to
continue.
19216811.live