Page 131 / 156
Scroll up to view Page 126 - 130
Time Zone
Admin
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
10-9
Edition 01
May 2008
The following table describes the fields of the Upgrade Firmware window.
Table 10-5
Field descriptions
Field
Description
Select File
Click
Browse
to select the Firmware
file.
Upload
Click
Upload
to begin upgrading the
Firmware with the selected file.
Reset
Click to clear the value in the
Select
File
field.
Time Zone
Click
Time Zone
in the Admin menu to open the System Time Zone Modification
window. In this window, you can set the system time manually or opt to obtain the
system time from a time server.
Page 132 / 156
Admin
Time Zone
10-10
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Figure 10-6
System Time Zone Modification window
The following table describes the fields of the System Time Zone Modification window.
Table 10-6
Field descriptions
Field
Description
Refresh
Click to refresh the displayed system
time.
Time Mode
Select
Time Server
to obtain the
system time from a time server.
Select
Manual
to configure the system
time manually.
Enable SNTP Client Update
Select the check box to use the SNTP
server.
Page 133 / 156
System Log
Admin
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
10-11
Edition 01
May 2008
Field
Description
SNTP Server
Choose the SNTP Server. You can
either choose one from the drop-down
list or enter one manually.
Time Zone
Select the Time Zone for your
geographical area.
Apply Changes
Click to save your changes.
System Log
Click
System Log
in the Admin menu to open the System Log window. The system log
records CellPipe 7130 RG events for later reference and can be useful for troubleshooting
problems.
Figure 10-7
System Log window
Page 134 / 156
Admin
SNMP
10-12
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
The following table describes the fields of the System Log window.
Table 10-7
Field descriptions
Field
Description
System Log
Enable or disable the System Log
function.
Apply Changes
Click to save your changes.
Refresh
Click to clear the system log.
SNMP
Click
SNMP
in the Admin menu to open the SNMP Configuration window.
Figure 10-8
SNMP Configuration window
The following table describes the fields of the SNMP Configuration window.
Table 10-8
Field descriptions
Field
Description
Trap IP Address
The IP address of the trap host. The
trap information is sent to this host.
Page 135 / 156
TR069
Admin
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
10-13
Edition 01
May 2008
Field
Description
Community name (read-only)
Used to read the information of the
CellPipe 7130 RG via SNMP.
Community name (write-only)
Used to configure the information of
the CellPipe 7130 RG via SNMP.
Apply Changes
Click to save your changes.
Reset
Click to clear the values in these fields.
TR069
The CPE WAN Management Protocol (TR-069) is the protocol used on the ACS
southbound interface between the CellPipe 7130 RG and an ACS. This protocol may be
used to manage other types of CPE, including standalone routers and LAN-side client
devices. An ACS can automatically configure your equipment based on configurations
stored in the ACS.
Click
TR069
in the Admin menu to open the TR069 Configuration window. In this
window, you can configure the TR-069 CPE.
19216811.live